Equipex FC 26, FC 34, CN 34 User Manual

OPERATION MANUAL

FOR

SODIR

CONVECTION OVENS

MODELS FC-26, FC-34, CN-34

OPERATION

Preheating

To preheat the convection oven, select the desired temperature by rotating the

thermostat knob clockwise to desired temperature setting and then turn the

timer knob that also acts as an ON/OFF switch clockwise to the maximum

setting (120 minutes). Both indicator lights (green and red) will be lit. The red

light will stay on until the oven reaches the desired temperature. The green light

will stay on until the timer reaches the indicated time setting. Allow 7 to 15

minutes for the preheating process.

Cooking

After the preheat process is completed, select the desired temperature (unless it

is already set) and turn the timer knob to select the time setting. When the set

time is elapsed, the heating element and the blower fan will be switched off and

the green indicator light will go out.

The SODIR convection ovens can be used for a wide variety of foods. Cooking

times will vary depending on food products, temperature settings and desired

results.

Cleaning

WARNING: Disconnect (unplug) electrical power supply before cleaning

Cleaning is very important in maintaining a safe and well working machine.

Allow the oven to cool before cleaning. Remove the baking racks and the bake

pan, and clean them separately using a damp cloth or sponge and mild cleaning

liquid soap. Use a cloth dampened slightly with a soap and water mixture to

clean all exterior and interior stainless steel surfaces. Use a clean lint-free cloth to

remove the excess water or soap.

DO NOT use an abrasive sponge on exterior or interior surfaces

DO NOT wash the oven under running water

DO NOT spray the exterior motor housing with any liquid

DO NOT allow water to drip into the motor housing or onto electrical

components

Inspect all parts on a regular basis to ensure that all parts are in good working

order. If a part is damaged, have the unit repaired by an authorized service

agency prior to returning the unit to operation. If you have trouble locating a

service agency in your area, call EQUIPEX, LTD. at 1-800-649-7885 and ask for

customer service.