Viper Home Security System VIPER4706V User Manual

®
The company behind Viper Auto Security  
Systems is Directed.  
Since its inception, Directed has had one  
purpose, to provide consumers with the fin-  
est vehicle security and accessories avail-  
able. The recipient of nearly 100 patents and  
Innovations Awards in the field of advanced  
electronic technology.  
®
Quality Directed products are sold and ser-  
viced throughout North America and around  
the world.  
Call (800) 876-0800 for more information  
about our products and services.  
NO ONE DARES  
®
COME CLOSE  
2013 Directed. All rights reserved.  
G4706V 2013-06  
©
M
O
D
E
L
Vista, CA 92081  
Directed is committed to delivering  
world class quality products and  
services that excite and delight our  
customers.  
4706V  
O W N E R’ S G U I D E  
 
Congratulations  
Congratulations on the purchase of your state-of-the-art remote start  
and keyless entry system. Reading this Owners Guide prior to using  
your system will help maximize the use of your system and its many  
features.For any additional questions please contact your authorized  
Directed dealer or contact Directed at 1-800-753-0600. (U.S. only)  
Important information  
Government Regulations and Safety information  
Read the Government Regulations and Warning! Safety  
First sections of this manual prior to operating this system.  
Warning! Failure to heed this information can result in  
death, personal injury or property damage and may also  
result in the illegal use of the system beyond its intended  
purpose.  
Your Warranty  
Your system comes with a warranty. The warranty terms are detailed at  
the end of this guide. Make sure that you receive the proof of purchase  
from your dealer, indicating the product was installed by an autho-  
rized Directed dealer.  
Replacement remote controls  
Please see your authorized dealer or visit us at www.directedstore.  
com to order additional remote controls. Remote control part numbers  
are found on the back of the device  
 
 
Contents  
Getting Started.................................................................................................... 4  
Charging the remote control:................................................................. 4  
Keys to using this manual...................................................................... 5  
Remote Control Information.................................................................................. 6  
Control Center .................................................................................................... 7  
Status Screen Icons.............................................................................................. 8  
Using your System............................................................................................. 11  
Commands and Confirmations ............................................................ 11  
Performing Commands....................................................................... 11  
Responder LC Command table ............................................................ 12  
Fault Condition Alerts......................................................................... 12  
Basic commands (Direct Access)......................................................................... 13  
Lock................................................................................................. 13  
Unlock.............................................................................................. 13  
AUX/Trunk........................................................................................ 14  
Remote Start...................................................................................... 14  
Advanced commands: (Level 1).......................................................................... 15  
Silent Lock......................................................................................... 15  
AUX 1.............................................................................................. 15  
Runtime Reset.................................................................................... 15  
Temp Request .................................................................................... 16  
Advanced commands: (Level 2).......................................................................... 17  
Remote Valet .................................................................................... 17  
AUX 2.............................................................................................. 17  
Timer Start ........................................................................................ 17  
Runtime Remaining ............................................................................ 18  
Advanced commands: (Level 3).......................................................................... 19  
Smart Start........................................................................................ 19  
AUX 3.............................................................................................. 19  
Advanced commands: (Level 4).......................................................................... 20  
AUX 4.............................................................................................. 20  
Defogger.......................................................................................... 20  
Responder LC configuration ............................................................................... 21  
Navigating menus and options............................................................ 21  
Button operation................................................................................ 21  
Access menu items ............................................................................ 21  
Main Menu....................................................................................................... 22  
Setup Remote menu:........................................................................... 22  
Remote Start Info ............................................................................... 23  
Runtime Alert..................................................................................... 24  
Car 2............................................................................................... 24  
 
Screen Color..................................................................................... 24  
Temp Unit ......................................................................................... 24  
Button Beep....................................................................................... 25  
System Type...................................................................................... 25  
Clock Set.......................................................................................... 25  
Review ............................................................................................. 25  
Exit .................................................................................................. 25  
Pair Remote....................................................................................... 26  
Demo mode:..................................................................................... 27  
Power Off:........................................................................................ 27  
Exit: ................................................................................................. 27  
System Features ................................................................................................ 28  
Emergency Override .......................................................................... 28  
Remote Start Features........................................................................................ 29  
Key Takeover..................................................................................... 29  
Remote Start Safe-lock........................................................................ 29  
Disabling Remote Start ....................................................................... 29  
Advanced Start ................................................................................. 29  
Temperature Reporting........................................................................ 31  
Remote Start Time-out Alert.................................................................. 31  
Pit Stop Mode ................................................................................... 31  
Manual Transmission Start (MTS mode) ................................................ 32  
Turbo Timer Mode.............................................................................. 33  
Remote Start Error.............................................................................. 33  
Remote and System Operations.......................................................................... 35  
Passive Locking ................................................................................. 35  
Auto Re-Locking................................................................................. 35  
Valet Mode....................................................................................... 36  
Power Save....................................................................................... 36  
Rapid Resume ................................................................................... 36  
Automatic Remote Updates ................................................................. 36  
Out of Range .................................................................................... 37  
No Remote Output............................................................................. 37  
Feature not Available ......................................................................... 37  
1-way Companion Remote Control..................................................................... 38  
Accessing Commands ........................................................................ 38  
Button Auto Lock................................................................................ 39  
Car Select......................................................................................... 39  
Programming .................................................................................... 39  
System Expansion Options................................................................................. 41  
Battery Information (Responder LC)..................................................................... 43  
Low Battery....................................................................................... 43  
Battery Life........................................................................................ 44  
Battery Information (1-Way) ................................................................ 45  
Battery Disposal ................................................................................ 45  
 
Glossary of Terms.............................................................................................. 46  
Patent Information............................................................................................. 47  
Government Regulations.................................................................................... 48  
Warning! Safety First......................................................................................... 50  
Installation ........................................................................................ 50  
Remote Start Capable ........................................................................ 50  
Manual Transmission Vehicles ............................................................. 50  
Interference....................................................................................... 52  
Upgrades and Batteries...................................................................... 52  
Water/Heat Resistance ...................................................................... 52  
Limited lifetime consumer warranty..................................................................... 53  
 
Getting Started  
Your Responder LC remote is powered by an internal rechargeable  
battery that can only be serviced by an authorized Directed dealer.  
Due to transit and storage time prior to your purchase, the battery  
charge may have depleted. To ensure proper operation, check the  
battery level and if not fully charged, use the provided cable to con-  
nect to the USB port on a computer. See “Battery Information (Re-  
sponder LC)” on page 43 and “Status Screen Icons” on page  
8 for more information about the battery.  
Charging the remote control:  
1. Plug the USB end of the provided USB cable into the USB port  
on a computer. Insert the mini-USB connector into the mini-USB  
port located on the side of the remote control (“Responder LC  
CHARGE  
2-Way” on page 4). The text field will display  
to  
indicate the remote control is charging (The remote remains  
operational while charging and can command the system).  
FULL  
2. Once fully charged the text field will display  
.
3. The remote control is then ready for use. Disconnect the cable  
from the remote control end first.  
If the battery is excessively depleted when charging, func-  
tionality may be delayed while it charges to the minimum  
voltage required to operate the display, after which normal  
charging resumes.  
Note  
© 2013 Directed. All rights reserved.  
4
 
Keys to using this manual  
Specific actions (in bold type) and style conventions are used consis-  
tently throughout this manual, they are as follows:  
Press: implies pushing in and releasing a button.  
Hold: is used after Press actions when a button needs to be held  
in position for an extended period of time, typically several sec-  
onds.  
LOCKED  
this style denotes the text which appears in the text field  
portion of the Display during operations described in the manual.  
Italicized words denote section/sub headings in this guide and  
can be located through the table of contents.  
An asterisk (*) when used after a word or phrase denotes that  
additional details can be found in related sections usually noted  
at the bottom of the page or end of the section.  
© 2013 Directed. All rights reserved.  
5
 
Remote Control Information  
Feature  
Description  
Internal Antenna  
Display  
Used for transmitting and receiving information  
Status screen - the upper portion of the display contains status  
icons for the System, Remote Start and Remote Control.  
Text field - the lower portion of display - shows the Clock,  
Runtime or Temperature during Remote Start, as well as  
Command confirmations, Page messages and programming  
menus  
Command buttons (4)  
Used to perform Locking, Unlocking, auxiliary channel and  
remote start commands  
A
U
X
Used to access function levels for commands, configura-  
tion menus for programming, Car Selection, and to request  
reports.  
Function button  
Mini-USB Port  
The battery charger plugs into this port.  
© 2013 Directed. All rights reserved.  
6
 
Control Center  
LED  
Control Center  
Button  
The Control Center, typically located on the upper part of the front  
windshield sends and receives commands or messages to and from  
your system. It consists of:  
The In-vehicle system antenna, for 2 way communication.  
The Status LED, as a visual indicator of the systems status.  
The Control button, for placing the system into Valet Mode* and  
to perform the Emergency Override** operation.  
*
See “Remote and System Operations” on page 35 for details.  
** See “System Features” on page 28 for details.  
© 2013 Directed. All rights reserved.  
7
 
Status Screen Icons  
ALL  
1
Status Screen  
Icons  
Text Field  
The table below describes all the status screen icons.  
Icon  
Description  
Locked: The system is locked.  
Locked: The system is Locked in Valet.  
Unlocked: The system is Unlocked.  
Unlocked: The system is Unlocked in Valet.  
Remote start is active, the engine is running.  
Timer mode is On; Remote Start is On.  
Note: When the icon is without an arrow head: Timer mode is  
enabled: Remote Start is Off  
© 2013 Directed. All rights reserved.  
8
 
Icon  
Description  
Smart Start is On; Remote Start is On.  
Note: When the icon is without an arrow head: Smart Start is  
On; Remote Start is Off.  
+
Manual Transmission Start mode is enabled, the engine can  
be started  
Displays the vehicle interior temperature  
On during Remote Start after performing the Defogger On  
command  
On during Trunk channel activation  
On during the Factory Security Full Trigger output (see System  
Features)  
On during Fault Report to indicate a Door is open when  
locking.  
On when remote is set to command the system programmed  
as Car 1*  
On when remote is set to command the system programmed  
as Car 2*  
© 2013 Directed. All rights reserved.  
9
 
Icon  
Description  
Bars indicate battery level is Full, ¾,½,¼ or Empty  
On while the remote control is transmitting a command  
On while the remote control is receiving a message  
On with Out of Range fault tone to indicate the remote failed to  
receive a command confirmation  
Pager on: The remote will wake up to listen for messages  
Pager off: The remote will not wake up to listen for messages  
The remote will Vibrate when messages are received  
The remote will emit Beeps and Tones when messages are  
received  
Text field  
Displays the Clock, Runtime, Temperature, message text and  
feature menus  
On after the Garage Open** message has been received.  
On after the Garage Closed** message has been received.  
*
This icon not present until the Car 2 is turned on in the Setup Re-  
mote configuration menu.  
** This icon not present until the remote is paired with an optional  
garage door opener.  
© 2013 Directed. All rights reserved.  
10  
 
Using your System  
Commands and Confirmations  
Commands, Basic or Advanced, are used to activate system features  
and are performed by pressing one of the Command buttons. Basic  
commands control the most often used and remote start features while  
Advanced commands control more specialized features and request  
reports.  
Confirmations for Basic or Advanced commands are indicated  
first by horn honks and parking light flashes, and then by Text, Icons  
and beeps or tones on the remote control. A description of each  
feature confirmation is found in the following Basic command and  
Advanced command sections.  
Performing Commands  
Perform Basic commands by pressing one of the command buttons  
while in the Direct Access level. Direct access is available while the  
text field displays the Clock, Temperature or Runtime. Perform Ad-  
vanced commands by pressing one of the command buttons after ac-  
cessing one of the Function Levels. Function Levels are available when  
the text field displays LEVEL 1,2,3 or 4.  
Advanced command example: Silent Lock  
1. Press the  
button once to access Function Level 1, the text  
LEVEL 1  
field will display  
.
LEVEL 1  
2. Press the  
button while  
text is still on to perform the  
Silent Lock command.  
SILENT LOCKED  
3. The Responder LC remote will display  
text field and update the status screen icons.  
in the  
© 2013 Directed. All rights reserved.  
11  
 
Responder LC Command table  
Direct Access  
Level  
x 1  
x 2  
x 3  
x 4  
Button  
LEVEL 1  
LEVEL 2  
LEVEL 3  
LEVEL 4  
Lock  
Silent Lock  
(Panic)  
UnLock  
Silent UnLock Remote Valet Car Finder  
Remote Start  
Runtime  
Reset  
Timer Start  
AUX 2  
Smart Start  
AUX 3  
Defogger  
AUX 4  
Aux/Trunk  
AUX 1  
A
U
X
Advance Level  
Change Car  
(3s), Enter  
programming  
(8s)  
Temperature  
Check  
Runtime  
Remaining  
Fault Condition Alerts  
If, when performing a command, a condition exists that does not al-  
REMOTE START ERROR  
low activation of a Remote Start feature the  
and a fault tone will play.  
text  
Remote Start features are not available when the Remote Start status  
is incorrect when the command is received. (Example: Runtime reset  
command received when remote start is off)  
Refer to the notes included in the command descriptions that address  
these faults or go to “Remote Start Error” on page 33 under “Re-  
mote Start Features” on page 29.  
© 2013 Directed. All rights reserved.  
12  
 
Basic commands (Direct Access)  
ALL  
1
Lock  
Press and release  
6:30  
The doors lock and the horn honks (if connected) and  
LOCKED  
parking lights flash once. The  
text and beeps play to confirm  
and the System Status Icons update. If Valet mode* is On the doors  
VALET  
lock and the  
text and tone play. Exit Valet mode to Lock the  
system normally.  
If the door was open when locking, you are notified of an active zone  
immediately after locking the system. The horn in the vehicle “honks”  
again. The 2-way remote control sounds a short “error” tone, and the  
LCD displays the door icon.  
Note: the optional door input and horn honk must be connected for  
the system to give notification.  
To Lock and Panic  
Press and hold  
The system Locks (or Locks in Valet) and, after 2 seconds, sounds  
PANIC  
the horn and flashes the parking lights. The  
text displays  
and horn honks to confirm. Press the  
or  
button to stop the  
output.  
Unlock  
Press and release  
The doors unlock (if connected), and the horn honks (if connected)  
and parking lights flash twice. The text and beeps play to  
UNLOCKED  
confirm and the system status icons update. If Valet mode* is On the  
VALET  
doors unlock and the  
text and tone play.  
© 2013 Directed. All rights reserved.  
13  
 
AUX/Trunk  
Press and hold  
AUX  
The Trunk opens (if connected) when this button is pressed for 2 sec-  
TRUNK  
onds. The  
text and tones play to confirm.  
Remote Start  
Press and release  
Activates (or if On, deactivates) the remote starter. The engine and  
REMOTE START ON  
parking lights turn On and the  
text and tones play,  
REMOTE START OFF  
or the engine and parking lights turn Off and the  
text and tones play to confirm, the Remote Start status icons update.  
The icon will display in the status screen and the text field will  
display the Runtime, Temperature or Clock as programmed. If Remote  
REMOTE START ERROR  
Start fails to activate,  
text and a fault tone play  
while the parking lights flash to identify the reason.  
*“Remote Start Error” on page 33 under “Remote Start Features”  
on page 29.  
For Manual transmission vehicles see “Manual Transmission Start  
(MTS mode)” on page 32 in the Remote Start Features section  
for more details.  
© 2013 Directed. All rights reserved.  
14  
 
Advanced commands: (Level 1)  
Press and release the  
button 1 time first, before  
pressing one of the following commands.  
level 1  
Silent Lock  
Press and release  
The doors lock (if connected), and the parking lights flash once. The  
SILENT LOCKED  
text plays to confirm and the System Status icons up-  
date. Valet mode* message may be received.  
Silent UnLock  
Press and release  
The doors unlock (if connected), and the parking lights flash twice.  
SILENT UNLOCK  
The  
text plays to confirm and the System Status icons  
update.  
AUX 1  
Press and release  
AUX  
AUX CHANNEL  
Activates (or if On, deactivates) the Aux 1 output. The  
text and On tones or Off tones play to confirm.  
Runtime Reset  
Press and release  
If more time is needed while remote start is active, runtime reset  
© 2013 Directed. All rights reserved.  
15  
 
will reset the runtime counter to the pre-programmed setting. The  
RUNTIME  
text and tones play to confirm. The text field will update  
if set to display runtime.  
Remote Start must be On to use this feature.  
Note  
Temp Request  
Press and hold the  
button  
Requests the vehicles interior temperature and temporarily displays it  
via status screen icon and text field.  
*
See”Remote and System Operations” on page 35 for details.  
© 2013 Directed. All rights reserved.  
16  
 
Advanced commands: (Level 2)  
Press and release the  
button 2 times first, before  
pressing one of the following commands.  
level 2  
Remote Valet  
Press and release  
VALET  
Enters (or if On, exits) Valet Mode. The  
text and beeps (1 for  
On, 2 for Off) play to confirm and the System Status icons update.  
See Valet Mode for more details.  
AUX 2  
Press and release  
AUX  
AUX CHANNEL  
Activates (or if On, deactivates) the Aux 2 output. The  
text and On tones or Off tones play to confirm.  
Timer Start*  
Press and release  
Activates (or if On, deactivates) Timer Start. The parking lights  
flash quickly four times for On and slowly four times for Off. The  
TIMER START ON  
TIMER START OFF  
or  
text and beeps play to con-  
firm and the Remote start status icons update.  
System needs to be Locked or Timer Start will not start the  
engine.  
Note  
© 2013 Directed. All rights reserved.  
17  
 
Runtime Remaining  
Press and hold the  
button  
Requests the remaining Remote start runtime and temporarily displays  
it in the text field.  
Remote Start must be On to use this feature.  
Note  
* See”Remote and System Operations” on page 35 for details.  
© 2013 Directed. All rights reserved.  
18  
 
Advanced commands: (Level 3)  
Press and release the  
button 3 times first, before  
pressing one of the following commands.  
level 3  
Car finder  
Press and release  
The horn emits one long honk and the parking lights flash for 10  
CAR FINDER  
seconds. The  
text and beeps play to confirm. The  
parking light flashes stop if Locked or Unlocked while Car Finder is  
in progress.  
Smart Start*  
Press and release  
Activates (or if On, deactivates) Smart Start. The parking lights  
flash quickly five times for On and slowly five times for Off. The  
SMART START ON  
SMART START OFF  
or  
text and beeps play to con-  
firm and the Remote start status icons update.  
System needs to be Locked or Smart Start will not start the  
engine.  
Note  
AUX 3  
Press and release  
AUX  
AUX CHANNEL  
Activates (or if On, deactivates) the Aux 3 output. The  
text and On tones or Off tones play to confirm.  
* See”Remote and System Operations” on page 35 for details.  
© 2013 Directed. All rights reserved.  
19  
 
Advanced commands: (Level 4)  
ALL  
1
Press and release the  
button 4 times first, before  
pressing one of the following commands.  
level 4  
AUX 4  
Press and release  
AUX  
AUX CHANNEL  
Activates (or if On, deactivates) the Aux 4 output. The  
text and On tones or Off tones play to confirm.  
Defogger*  
Press and release  
Activates the vehicle Defogger circuit (if connected) while Remote Start  
DEFOG ON  
is activated. The  
text and beeps play to confirm and the  
Remote Start status icons update. For convenience, the Defogger cir-  
cuit will also automatically activate 10 seconds after remote starting if  
the temperature is below 55°F.  
Remote Start must be active to use this feature.  
Note  
* This feature must be installed and turned on by an authorized Directed  
dealer.  
© 2013 Directed. All rights reserved.  
20  
 
Responder LC configuration  
Operations of the Responder LC and how it communicates messages  
are set in the configuration Main Menu.  
Navigating menus and options  
Navigating menus and features, changing options, and exiting are  
performed using the remote control buttons. The following instructions  
discuss how to access and configure the settings.  
Button operation  
To access menus, set options, and to perform actions that are  
displayed in the text field, use the  
To scroll the menu lists in the text field use the  
To exit configuration: use the or buttons.  
button.  
AUX  
&
buttons.  
Access menu items  
1. Press and hold the  
button for 8 seconds, the remote will beep  
is displayed. (If Car 2 is on, ignore the Car  
MAIN MENU  
once,  
Select text and beep after 3 seconds).  
2. Release the button to display the Main Menu item list,  
is displayed.  
SETUP REMOTE  
3. The Main Menu has been accessed and configuring can begin.  
Use the following process to view the Main Menu features, op-  
tions and settings in the text field. The following actions are com-  
monly used throughout the configuration operation.  
AUX  
Press the  
or  
buttons to change the feature or option  
that is displayed in the text field.  
Press the  
button to choose the feature in the text field and  
view its options. Press it when the desired feature or option  
is in the text field to set it as the new setting.  
© 2013 Directed. All rights reserved.  
21  
 
Main Menu  
The following Main Menu list of features is available for configuration  
of the remote control.  
Setup Remote menu:  
Keypad Lock  
OFF AUTO  
Options:  
,
OFF  
When  
, the buttons do not lock and always perform a com-  
AUTO  
mand when pressed. When set to  
, the remote buttons  
lock after a 20 second lapse between buttons presses to prevent  
unintentional operations. If a button is pressed when locked a  
fault tone plays as an alert followed by unlock instructions in the  
text field.  
To unlock the buttons, press the  
button. The unlock tones play and  
button followed by the  
READY  
is displayed in the text  
field, a command can now be performed.  
Auto unlocking  
After turning the ignition off, a message to the remote will un-  
lock the keypad buttons the next command is performed. If Auto  
Unlocking is not desired this message can be turned off by an  
authorized Directed Dealer.  
Page Mode  
Options:  
POWER SAVE OFF  
ON  
,
,
Paging is how the Responder LC remote monitors your systems  
POWER SAVE  
messages.  
extends battery life by turning Paging  
© 2013 Directed. All rights reserved.  
22  
 
Off after one week, if the remote control is not used during this  
period. Just press any button to resume system monitoring. When  
ON  
set to  
it wakes up every few seconds to listen for pages  
OFF  
from the system. When set to  
it does not wake up to receive  
remote start or factory alarm trigger pages.  
OFF  
Note: When  
, responses are still received when a command  
is performed but alarm trigger pages will not be received.  
Page Alert  
Options:  
TONE VIBE TONE  
VIBE  
SCREEN ONLY  
,
,
,
There are several ways for the Responder LC to alert you when it  
has received a message from the system.  
TONE VIBE  
alerts by emitting tones and vibrating the remote. Se-  
TONE  
lect  
alerts by emitting tones that are unique for each mes-  
VIBE  
sage. Select  
and the Responder LC will silently alert you  
SCREEN ONLY  
with a gentle vibration, or select  
want to be interrupted.  
when you don’t  
Remote Start Info  
RUNTIME  
TEMP CLOCK  
Options:  
,
,
The text field can be set to display the information you prefer dur-  
RUNTIME  
TEMP  
ing remote start.  
: Remote Start Runtime,  
: vehicle  
CLOCK  
interior Temperature, or the  
field while Remote Start is on.  
will be displayed in the text  
© 2013 Directed. All rights reserved.  
23  
 
Runtime Alert  
ON  
OFF  
Options:  
,
The main unit will send a page to alert you when the runtime is  
ON  
about to expire. When set to  
, an alert is generated when  
OFF  
the Remote Start Time-out message is received. When  
alert output is emitted for the message.  
, no  
Car 2  
Options:  
OFF  
ON HOME  
,
,
This remote can control two systems independently. When set to  
OFF  
ON  
, the Car2 select option is not available. When set to  
HOME  
the remote can be set to control 2 systems. The  
for pairing to a home security system.  
option is  
Screen Color  
OFF WHITE LT GRN VIOLET AQUA  
RED  
GREEN BLUE  
Options:  
,
,
,
,
,
,
,
OFF  
The status screen backlighting can be  
, or will illuminate  
with a selected color during output when set to one of the option  
colors.  
Temp Unit  
Options:  
F
C
,
Temperature can be displayed in your choice of temperature  
scales, Fahrenheit or Celsius.  
© 2013 Directed. All rights reserved.  
24  
 
Button Beep  
ON  
OFF  
Options:  
,
ON  
When set to  
, the remote will emit a beep as confirmation  
OFF  
of a button press. When set to  
button presses.  
, beeps are not emitted for  
System Type  
SEC RKE  
Options:  
,
Selects the type of system, namely; Security or Remote Keyless  
Entry to which the remote has been paired, and adjusts the text  
and main menu accordingly. This has been pre-set by the factory  
for your system.  
Clock Set  
Options:  
HOUR MIN  
,
Review  
Displays firmware version  
Exit  
Exits and returns to the main menu  
© 2013 Directed. All rights reserved.  
25  
 
Pair Remote  
Remote pairing is a process where the Responder LC remote, and the  
in-vehicle system learn the others encrypted identification, securing  
communication between the two from intruders.  
Note: Remotes are pre-programmed from the factory.  
Prepare the vehicle system to be Paired with a new remote  
1. Turn the key to the On position.  
2. Within 5 seconds press and release 1 time the Control button on  
the Control Center.  
3. Within 5 seconds, press and hold the Control button. The status  
LED will flash one time and the horn will honk once to confirm the  
system is ready for remote pairing.  
4. Release the Control button and proceed below.  
Note: If pairing does not result within 60 seconds, the system exits  
and the horn honks.  
Prepare the new remote to be Paired with the system  
1. Make sure the remote control is set for the desired Car 1 or Car  
2 operation.  
2. Perform the steps under Access menu items section to access the  
Pair Remote mode.  
PAIR  
3. When the remote beeps 3 times and  
remote is ready to pair.  
is displayed the  
4. Press the  
button.  
5. Wait several seconds as the remote generates a security encryp-  
tion and sends it to the Control Center. If Pair is successful the  
horn honks and the remote control emits several tones. The screen  
also displays if the Pairing was successful or failed with corre-  
sponding text. If the Pairing has failed, repeat step 4.  
© 2013 Directed. All rights reserved.  
26  
 
Demo mode:  
Demo Mode plays a pre-selected group of animations as a demon-  
stration tool to show friends or family. Running Demo mode shortens  
the battery life over time if used excessively:  
SINGLE SILENT  
: The remote will display a selection of icons on  
the status screen without beeps and tones then stop  
SINGLE SOUND  
: The remote will display a selection of icons on  
the status screen with beeps and tones then stop  
Power Off:  
When an extended period of non-operation is anticipated, turning the  
power off will preserve the battery charge. Press the  
button while  
POWER OFF  
is displayed. The status screen icons clear as the power  
off tones play, the remote is turned off.  
To turn the remote on, Press and hold the  
button for 3 seconds,  
the status screen icons refresh as the power on tones play. The remote  
also turns itself on and begins charging when the battery charger is  
connected.  
Exit:  
To return to normal operation, press the  
played.  
button while EXIT is dis-  
© 2013 Directed. All rights reserved.  
27  
 
System Features  
Factory Alarm Trigger Notification: This system has an optional input  
that can be connected to the horn circuit. If the vehicle has a factory  
alarm controlled by the lock/unlock keyless entry system, the remote  
reports when the factory alarm is triggered - the remote screen dis-  
plays the alarm icon and “alarm door open” displays the text area.  
Status LED: The Control Center Status LED flashes as a visual indicator  
that your vehicles remote start system is locked.  
Starter Kill: The Failsafe® Starter Kill relay prevents the engine from  
starting.  
May require additional parts and installation  
Note  
Emergency Override  
The following procedure bypasses the optional Failsafe Starter Kill  
when a programmed remote is not available.  
Number of presses__________  
1. Turn the ignition On.  
2. Press the control button on the Control Center the correct  
number of times (the default is 1 press).  
3. After a few seconds the Failsafe Starter Kill is bypassed and  
you may start your vehicle with a key.  
As a precaution, if programmed for Passive Locking or Auto  
Re-locking the system should be placed into Valet Mode  
until a remote is available.  
Note  
© 2013 Directed. All rights reserved.  
28  
 
Remote Start Features  
Key Takeover  
When you are ready to drive  
The system keeps the engine running until the vehicle is ready to be  
driven. To perform Key Takeover:  
1. Unlock the system and enter the vehicle, do not step on the foot  
brake.  
2. Insert the key, turn it to the run position, and then step on the foot  
brake, the remote start then turns off.  
3. The parking lights turn off to indicate remote start is off, and then  
REMOTE START OFF  
after a few seconds the remote plays the  
sage. The vehicle is ready to drive.  
mes-  
Remote Start Safe-lock  
Remote start safe-lock makes sure the doors are locked while the en-  
gine is running and after, even if they are unlocked when remote start  
is activated. Door locks may require additional parts and labor.  
Disabling Remote Start  
Remote start can be disabled by moving the Toggle Switch to the Off  
position. If remote start is attempted while Off, the engine will not start.  
(See Remote Start Error under Remote Start Features) move the switch  
back to the On position to resume normal operation.  
Advanced Start  
The Advanced start features Timer Mode and Smart Start will automat-  
ically start the engine to maintain battery charge or combat extreme  
cold when parked for an extended period of time.  
© 2013 Directed. All rights reserved.  
29  
 
Precautions for the Advanced Start features:  
Park the vehicle in a well ventilated area away from windows  
and doors that lead into inhabited spaces.  
Lock the vehicle, the engine will not start unless the doors are  
locked.  
Only one Advanced start feature can be enabled at any given  
time.  
For manual transmission vehicles MTS mode must be enabled  
before Timer Mode or Smart Start can be activated.  
Timer Start or Smart Start mode automatically exits when the ve-  
hicle is unlocked.  
Timer Mode operation  
Activation begins a countdown timer as set by the installer (de-  
fault 3 hours). When the timer expires the engine starts and the  
REMOTE START ON  
message is sent to the remote control. When the  
REMOTE START OFF  
Remote start runtime expires the engine shuts off, the  
message is sent to the remote control and the countdown timer restarts.  
This will repeat as many times as set by the installer (default 6 starts).  
Timer Start is exited after the final start.  
Smart Start operation  
Smart Start uses the settings for Timer Mode in addition to temperature  
and battery level to automatically start the engine. Activation begins  
the countdown timer. When the timer expires the vehicle interior tem-  
perature and battery level is checked and, if the Temperature is above  
100F, below 0F, or the battery level is below 10.5v, the engine will  
REMOTE START ON  
start and the  
message will be sent to the remote  
controls. When the Remote start runtime expires the engine shuts off,  
REMOTE START OFF  
the  
message is sent to the remote control and the  
countdown timer restarts. Smart Start is exited after the final start.  
© 2013 Directed. All rights reserved.  
30  
 
The temperature and battery thresholds can be changed by  
an authorized Directed dealer if a higher or lower threshold  
is desired.  
Note  
Temperature Reporting  
During Remote start the vehicle interior is checked regularly for tem-  
perature changes. If a change in temperature is detected this report  
will be sent to the remote for display. Each time the remote receives  
this report it will beep, update, and display the newest temperature  
information using the Temperature Gauge icon.  
Temperature report must be turned on by an authorized Di-  
rected dealer.  
Note  
Remote Start Time-out Alert  
During remote start a message is sent three minutes before and again  
RUNTIME LOW  
at one minute before the engine turns off. The  
text plays  
with tones as an alert to reset the runtime if desired.  
Pit Stop Mode  
To exit vehicle with engine running  
The system keeps the engine running during short trips into the house  
or convenience store. To perform Pit Stop:  
1. With the engine running, set the parking brake and release the  
foot brake.  
2. Press the  
button, the parking lights will turn on and the  
REMOTE START ON  
message will play on the remote control.  
3. Turn the key to off, and remove it from the ignition, the engine  
© 2013 Directed. All rights reserved.  
31  
 
continues running for the programmed runtime.  
4. Exit the vehicle and Lock the system.  
For Pit Stop on manual transmission vehicles follow the di-  
rections in the “Manual Transmission Start (MTS mode)” on  
page 32 section with the door open.  
Note  
Manual Transmission Start (MTS mode)  
When installed into a manual transmission vehicle, the system requires  
that the MTS mode is properly set when parking. If MTS mode is not  
properly set or is defeated after being properly set the system will not  
REMOTE START ERROR  
start the engine and the  
an alert.  
text and tones play as  
1. With the engine running, press the foot brake then set the parking  
brake and leave the engine running. For Pit Stop or Turbo Timer  
mode (to leave the engine running after Locking) open the driver  
door.  
2. Release the foot brake. As long as the engine is running there is  
no time limit to perform this step.  
3. Within 20 seconds of foot brake release, press any command  
button on the remote, after 20 seconds return to Step 2 (For Turbo  
Timer Mode, press the optional dash mounted activation button  
or send the Timer Mode command from the Advanced Start menu  
screen).  
4. The parking lights flash 5 times to confirm MTS mode en-  
able and the remote start activates the ignition outputs. The  
REMOTE START ON  
text and beeps play to confirm.  
5. Turn Off and remove the key from the ignition switch, the engine  
remains running.  
6. Exit the vehicle, close all the doors and Lock the system.  
© 2013 Directed. All rights reserved.  
32  
 
REMOTE START OFF  
7. The engine turns off and after a few seconds, the  
message plays to confirm. If the door is opened in Step 3 then  
the engine continues to run.  
Turbo Timer Mode  
The system keeps the engine running for the Turbo Timer runtime and  
can be activated by remote control or optional dash mounted activa-  
tion button.  
1. With the engine running, set the parking brake.  
2. Within 20 seconds, press the optional dash mounted activation  
button or perform the Timer Mode command.  
3. The parking lights turn on and the remote start activates the igni-  
REMOTE START ON  
tion outputs. The  
text and beeps play to confirm.  
4. Turn Off and remove the key from the ignition switch, the engine  
remains running.  
5. Exit the vehicle, close all the doors and Lock the system.  
6. The engine runs for the Turbo Mode runtime.  
Turbo Timer must be turned on by an authorized Directed  
dealer.  
Note  
For Turbo Timer mode on manual transmission vehicles fol-  
low the directions in the Manual Transmission Start (MTS  
mode) section with the door open and in step 3 send the  
Timer Mode command from the remote control.  
Remote Start Error  
For user safety, the system must be properly configured or remote start  
will not activate. If the remote start fails to active, refer to the follow-  
ing table for the screens and parking light flashes that will identify the  
configuration issue and resolution.  
© 2013 Directed. All rights reserved.  
33  
 
Flashes *  
Possible Fault  
Solution  
5
Brake on  
Release foot brake  
6
7
Hood open  
Close hood  
After performing Remote Start  
command - MTS not enabled  
Enable MTS mode  
After performing Timer Mode or  
Smart Start command  
Check all Solutions  
Turn switch on  
8
Toggle Switch off  
* Refers to the number of parking light flashes.  
© 2013 Directed. All rights reserved.  
34  
 
Remote and System Operations  
Passive Locking*  
Park and exit the vehicle, after the doors are closed the Passive Lock-  
ing countdown begins. The led flashes quickly and upon reaching 20  
seconds the horn honks once. At 30 seconds the system Locks itself.  
Anytime before the system Locks you can re-enter the vehicle to load or  
unload items and, after closing passive Locking resumes.  
To stay secure in case of accidental Unlocking the system, if a door is  
not opened within 30 seconds the system re-Locks itself and re-locks  
the doors.  
Auto Re-Locking*  
Auto re-Lock ensures the vehicle stays protected if it is not entered after  
Unlocking by remote control. After Unlocking by remote, the system  
automatically re-Locks itself (and locks the doors if programmed on) in  
30 seconds. Open any point of entry to stop the Lock until the next  
Unlock by remote.  
Onetime Bypass*  
Turn the ignition On for one to three seconds and then Off. The horn  
honks once to confirm one-time bypass is enabled.  
One-time bypass can be used to temporarily bypass the Passive Lock-  
ing operation for one cycle. It also bypasses the comfort closure and  
auxiliary channel outputs programmed to activate when Locking. After  
the next Unlock all operations return to normal.  
* These features must be turned on by an authorized Directed dealer.  
© 2013 Directed. All rights reserved.  
35  
 
Valet Mode  
Valet mode can be entered and exited by performing the Remote Valet  
command or manually using the vehicle key and the control button.  
When entered, the optional Failsafe Starter Kill is defeated while the  
convenience features still operate normally.  
Lock and Unlock commands still lock and unlock the doors while the  
VALET  
text and beeps play to confirm.  
Use the following steps to manually enter and exit Valet Mode:  
1. Turn the ignition switch On and then Off  
2. Immediately press and release the control button once  
3. The control center LED turns On when entering and Off when  
exiting.  
Power Save  
To reduce power consumption the control center status led modifies its  
output if the vehicle is parked for an extended period. If Locked the  
flashing is reduced after 24 hours. When Valet mode is On the LED  
will turn off 1 hour and will reset each time the ignition is turned off.  
Rapid Resume  
If power is ever disconnected by a mechanic, the system will resume  
the state it was in at the time of disconnection, when power is recon-  
nected.  
Automatic Remote Updates  
The system sends a silent message to all remote controls after any  
major action has occurred. When the remote receives this message it  
updates the status screen icons. This way all users are able to quickly  
review the system status just by accessing the status screen.  
© 2013 Directed. All rights reserved.  
36  
 
Out of Range  
Each time a command is performed the remote will expect a com-  
mand confirmation from the system. If a command confirmation is not  
received the out-of-range icon ( ) and a fault tone will play as an  
alert.  
No Remote Output  
Occasionally when a command is performed the remote may not  
generate a command confirmation output or Out of Range output.  
This indicates that the system received the command but it was an  
incomplete command (e.g. Aux button pressed too short to activate  
the trunk release) or it was an illegal message (e.g. the command  
was corrupted due to local RF interference). These are temporary nor-  
mal functions of the system and remote, perform the command again  
within 10 seconds to return to normal operation.  
Feature not Available  
NOT AVAILABLE  
The  
message is a generic one which varies in cause  
and solution depending upon the command used:  
Command  
Cause  
Reason/Solution  
Runtime Reset Remote Start is Off  
Only available when Remote Start is On  
Defroster  
Remote Start is Off.  
Not configured for  
this.  
Only available when Remote Start is On.  
Only available when configured for  
Defroster control.  
© 2013 Directed. All rights reserved.  
37  
 
1-way Companion Remote Control  
Direct Access  
Level  
Button  
x 1  
x 2  
x 3  
x 4  
LEVEL 1  
LEVEL 2  
LEVEL 3  
LEVEL 4  
Lock  
Silent Lock  
(Panic)  
Unlock  
Silent Unlock Remote Valet Car Finder  
Remote Start  
Runtime  
Reset  
Timer Start  
AUX 2  
Smart Start  
AUX 3  
Defogger  
AUX 4  
Aux/Trunk  
Not Used  
AUX 1  
A
U
X
Used to access function levels for Advanced Commands  
with multiplier in top row implies button presses)  
(
Using the 1 way companion remote  
The companion 1 way remote commands the system features as  
shown in the previous table, but without the message display of the  
Responder LC remote. Horn honks and parking light flashes are used  
to indicate that a command has been received and activated as de-  
scribed in the “Basic commands (Direct Access)” on page 13 and  
in the “Advanced commands: (Level 1)” on page 15.  
Accessing Commands  
Similar to the Responder LC remote, Basic commands are performed  
when a command button is pressed directly. To perform Advanced  
Commands press the  
els,  
button 1 to 4 times to access function lev-  
4 times. The  
x4 in the table for example implies pressing  
LED flashes in groups for a few seconds to indicate the level. Press  
the desired command button while the LED is flashing to perform the  
command.  
 
Button Auto Lock  
When On, the remote control buttons lock if more than 20 seconds  
lapses between button presses. If a button is pressed when locked, a  
fault tone is emitted. To unlock the buttons; press the button followed  
by the  
button, the buttons unlock and tones play to confirm.  
Car Select  
Car 2 must first be turned On (See Remote Features menu under Pro-  
gramming). Press and hold the  
button for 3 seconds. The remote  
flashes the LED and beeps once or twice to indicate the selected Car  
is 1 or 2, release the button for Car Select or continue to hold for  
programming.  
Release the  
button, then press and release while the LED and  
beeps continue to perform Car Select. Once the car is selected a com-  
mand can be performed by pressing one of the command buttons.  
Programming  
To enter: Press and hold the  
button for 8 seconds, the remote emits  
one long beep and turns the LED on, the programming main menu has  
been accessed (see the following “Remote Features menu”).  
To exit: Press and release the  
button once, then press and hold the  
button again. 1 short and 1 long beep is emitted for each step  
back, the LED turns off when programming is exited.  
1. Remote Features menu  
After entering the programming mode: Press and hold the  
button, 2 LED flashes and beeps indicate the remote features  
menu is accessed and can be set. Press buttons indicated below,  
1beep and flash turns the feature on, 2 beeps and flashes turns  
the feature off.  
Autolock feature: Press  
to turn on/off.  
© 2013 Directed. All rights reserved.  
39  
 
Remote Beeps: Press  
Car 2 feature: Press  
to turn on/off.  
to turn on/off.  
Once the desired feature has been changed you can exit pro-  
gramming by following the procedure described previously.  
2. Remote Learning  
After entering the programming mode: Press and hold the  
button,3 LED flashes and beeps indicates the remote is ready to  
program to the system.  
Per the instruction in Remote Pair under the Main Menu section  
of this guide, following step 4 of Prepare the vehicle system to  
be Paired with a new remote. Press the  
button. Wait several  
seconds as the remote generates a security encryption and sends  
it to the Control Center. The horn honks to indicate Pairing is  
complete.  
Once the desired feature has been changed you can exit pro-  
gramming by following the procedure described previously.  
© 2013 Directed. All rights reserved.  
40  
 
System Expansion Options  
Controlling two vehicles (Car Select)  
The Responder LC and 1way companion remote can control systems  
in two different vehicles saving the need for multiple remote controls.  
This feature also allows for customized system configurations on each  
vehicle that has more than one driver. See Owner Recognition for  
details.  
Owner recognition  
The system can be configured to recognize the remote used when  
unlocking, and will change selected features to match the remote users  
preferences. Memory seat adjustment, horn honks, passive Locking,  
remote button auto unlocking, can all be custom set for each remote  
user at the time of installation.  
Comfort closure  
Comfort Closure emulates turning the key in the door cylinder or hold-  
ing the lock button of an OEM keyless entry. It will automatically close  
the windows and sunroof on vehicles with this type of OEM conve-  
nience feature.  
Driver door priority unlocking  
The door unlocking operation can be configured to emulate an OEM  
style of driver priority unlocking for added security during Unlocking.  
© 2013 Directed. All rights reserved.  
41  
 
Auxiliary Channels  
The Auxiliary Channel outputs of this system can activate many of the  
convenience features found in todays vehicles. Once a command is  
performed to activate a convenience feature the Responder LC dis-  
plays text that matches the feature. The system installer can clarify  
if any of the below listed features are compatible with your vehicle.  
Trunk release  
Windows open/close  
Left Sliding door open/close  
Right Sliding door open/close  
Rear Hatch open/close  
Sunroof open/close  
Audio system  
Headlights  
© 2013 Directed. All rights reserved.  
42  
 
Battery Information (Responder LC)  
The Responder LC remote control is powered by an internal recharge-  
able battery that can be serviced only through an authorized Directed  
Electronics dealer. The information and precautions in this section can  
help maximize your batterys life and usage in providing your Re-  
sponder LC remote control with many years of trouble free operation.  
The battery information for the 1way companion remote control can  
be found in the “1-way Companion Remote Control” on page 38  
section of this manual.  
Warnings! NEVER use a cable other than the one pro-  
vided or plug into an unspecified source. Injury, severe  
damage or explosion may occur when connected to  
any other products or used in a way not intended.  
Charging the battery when the temperature is below  
32°F (0°C) or above 113°F (45°C) may cause severe  
battery damage and/or reduce battery life. Avoid  
placing the remote control in areas exposed to ex-  
treme cold or heat (direct sunlight) when charging the  
battery.  
Low Battery  
After a command is performed the Responder LC and 1way com-  
panion remote controls check their battery level and, when the level  
requires attention, will begin generating alerts. Once the alerts begin  
they will continue to command the system for several days but should  
be charged at the earliest opportunity or failure to control the system  
may occur.  
© 2013 Directed. All rights reserved.  
43  
 
Low Battery Alerts  
When Unlocking the system using a remote with a low battery the  
horn will emit one additional horn honk as an alert. If confirmation  
honks are programmed off, the system will still emit one honk as an  
LOWBAT  
alert when Unlocking. After performing a command,  
and  
several beeps play on the Responder LC remote to indicate the battery  
needs to be charged.  
To preserve power at critically low battery levels the  
Responder LC turns the pager off and stops receiving  
messages from the system. It will continue to command  
the system until the battery can be charged.  
Important  
Battery Life  
The Responder LC remote control has many features that make it one  
of the most unique remote controls on the market today, including su-  
perior long range communication with the system. The default feature  
settings provide for excellent battery charge duration. However, to  
maximize this duration between charges, the following suggestions  
will help:  
Turn the remote Off: When not in use and/or out of range of the  
vehicle the remote can be turned off in the Main menu.  
Turn Paging off: The remote will not wake up to check for mes-  
sages with Paging off in the Setup Remote menu. Caution! The  
remote will not receive messages from the system.  
Turn Beeps off: The Button beeps can be turned off in the Setup  
Remote menu. The command beeps still play normally.  
© 2013 Directed. All rights reserved.  
44  
 
Battery Information (1-Way)  
The 1- way companion remote is powered by one 3V coin cell lithium  
battery (P/N CR-2032) that will last approximately one year under  
normal use.  
Battery Replacement  
1. If present, remove the small screw on the back of the remote.  
2. Use a small flat blade screwdriver and insert it into the slot locat-  
ed along the bottom of the remote, near the key ring. Carefully  
pry open the case.  
3. Gently slide out the used battery to remove it from the holding  
clip. Orient the new battery for the correct polarity and insert  
into holding clip.  
4. Reposition case parts, and snap together by pressing firmly and  
evenly on the front and back. Reinstall screw (if applicable).  
Battery Disposal  
Directed cares about the environment. If you need to dis-  
pose of the battery, please do so in accordance with your  
municipal requirements for battery disposal.  
© 2013 Directed. All rights reserved.  
45  
 
Glossary of Terms  
Document Terminology  
The “brain” of your system. Usually hidden underneath the  
Control Module  
dash area of the vehicle. It houses the microprocessor which  
monitors your vehicle and controls all of the systems functions.  
A hand-held, remote control which operates the various func-  
tions of your system and receives messages and pages from  
the system.  
Responder LC (2-way  
Remote Control)  
A hand-held, remote control which operates the various func-  
tions of your system but does not provide message display..  
Companion Remote  
(1-way Remote  
Control)  
The control center contains the systems radio-frequency an-  
tenna, the control button, and the Status LED. For maximum  
remote-control range, the control center is usually located at  
the top of the windshield, centered near the rear-view mirror.  
Control Center  
A light used to indicate the status of your system. It is located  
on your systems Control Center.  
Status LED  
A small push button located on your systems control center. It  
is used to override (Unlock) the system when a remote is not  
available or to enter or exit Valet Mode.  
Control Button  
© 2013 Directed. All rights reserved.  
46  
 
Patent Information  
This product is covered by one or more of the following United States  
patents:  
Remote Start Patents:  
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;  
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;  
7,483,783  
Vehicle Security Patents:  
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;  
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;  
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484  
Other patents pending.  
© 2013 Directed. All rights reserved.  
47  
 
Government Regulations  
This device complies with Part 15 of FCC rules. Operation is subject to the fol-  
lowing two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference  
that may cause undesirable operation.  
This equipment has been tested and found to comply with the limits for a  
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates and can radiate radio fre-  
quency energy and, if not installed and used in accordance with the instruction  
manual, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installa-  
tion. If this equipment does cause harmful interference to radio or television,  
which can be determined by turning the equipment OFF and ON, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio / TV technician for help.  
Remote Controls  
To satisfy FCC RF exposure compliance requirements, this device should be  
used in hand-held, hand operated configurations only. The device and its an-  
tenna must maintain a separation distance of 20 cm or more from the persons  
body, except for the hand and wrists, to satisfy RF exposure compliance. This  
device is designed to be used in a persons hands and its operating configu-  
rations do not support normal transmissions while it is carried in pockets or  
holsters next to a persons body.  
© 2013 Directed. All rights reserved.  
48  
 
Control Center  
To satisfy FCC RF exposure compliance requirements, the device and its an-  
tenna must maintain a separation distance of 20 cm or more from the persons  
body, except for the hand and wrists, to satisfy RF exposure compliance.  
This device complies with the Industry Canada Radio Standards Specification  
RSS 210. Its use is authorized only on a no-interference, no-protection basis;  
in other words, this device must not be used if it is determined that it causes  
harmful interference to services authorized by IC. In addition, the user of this  
device must accept any radio interference that may be received, even if this  
interference could affect the operation of the device.  
WARNING! Changes or modifications not expressly approved by the party re-  
sponsible for compliance could void the users authority to operate this device.  
© 2013 Directed. All rights reserved.  
49  
 
Warning! Safety First  
Please read the safety warnings below before proceeding. Improper  
use of the product may be dangerous or illegal.  
Installation  
Due to the complexity of this system, installation of this product must only be  
performed by an authorized Directed dealer. If you have any questions, ask  
your retailer or contact Directed directly at 1-800-753-0600.  
Remote Start Capable  
When properly installed, this system can start the vehicle via a command  
signal from the remote control transmitter. Therefore, never operate the system  
in an enclosed area or partially enclosed area without ventilation (such as a  
garage). When parking in an enclosed or partially enclosed area or when  
having the vehicle serviced, the remote start system must be disabled using the  
installed menu wheel. It is the users sole responsibility to properly handle and  
keep out of reach from children all remote control transmitters to assure that the  
system does not unintentionally remote start the vehicle. THE USER MUST IN-  
STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA  
ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV-  
ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR-  
AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the  
sole responsibility of the user.  
Manual Transmission Vehicles  
Remote starters on manual transmission vehicles operate differently than  
those with automatic transmission because you must leave your car in neutral.  
You must read this Owners Guide to familiarize yourself with the proper proce-  
dures regarding manual transmission remote starters. If you have any questions,  
ask your authorized Directed dealer or contact Directed at 1-800-753-0600.  
© 2013 Directed. All rights reserved.  
50  
 
Before remote starting a manual transmission vehicle, be sure to:  
Leave the vehicle in neutral and be sure no one is standing in front or  
behind the vehicle.  
Only remote start on a flat surface  
Have the parking brake fully engaged  
WARNING! It is the responsibility of the owner to ensure the parking/emer-  
gency brake properly functions. Failure to do so can result in personal injury or  
property damage. We recommend the owner have the parking / emergency  
brake system inspected and adjusted by a qualified automotive shop biannu-  
ally.  
Use of this product in a manner contrary to its intended mode of operation may  
result in property damage, personal injury, or death. (1) Never remotely start  
the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle  
with the keys in the ignition. The user must also have the neutral safety feature  
of the vehicle periodically checked, wherein the vehicle must not remotely start  
while the car is in gear. This testing should be performed by an authorized  
Directed dealer in accordance with the Safety Check outlined in the product  
installation guide. If the vehicle starts in gear, cease remote start operation im-  
mediately and consult with the authorized Directed dealer to fix the problem.  
After the remote start module has been installed, contact your authorized dealer  
to have him or her test the remote start module by performing the Safety Check  
outlined in the product installation guide. If the vehicle starts when performing  
the Neutral Safety Shutdown Circuit test, the remote start unit has not been  
properly installed. The remote start module must be removed or the installer  
must properly reinstall the remote start system so that the vehicle does not start  
in gear. All installations must be performed by an authorized Directed dealer.  
© 2013 Directed. All rights reserved.  
51  
 
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN  
GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER-  
ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY  
RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME-  
DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF  
AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE IN-  
STALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPON-  
SIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.  
This product is designed for fuel injected vehicles only. Use of this  
product in a standard transmission vehicle must be in strict accordance  
with this guide.  
This product should not be installed in any convertible vehicles, soft or  
hard top with a manual transmission. Installation in such vehicles may  
pose certain risk.  
Interference  
All radio devices are subject to interference which could affect proper  
performance.  
Upgrades and Batteries  
Any upgrades to this product and/or installation of batteries must be  
performed by an authorized dealer. Do not attempt to perform any  
unauthorized modifications to this product.  
Water/Heat Resistance  
This product is not designed to be water and/or heat-resistant. Please  
take care to keep this product dry and away from heat sources. Any  
damage from water or heat will void the warranty.  
© 2013 Directed. All rights reserved.  
52  
 
Limited lifetime consumer warranty  
Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace  
(at Directeds election) with a comparable reconditioned model any Directed unit (hereaf-  
ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated  
sensors and accessories, which proves to be defective in workmanship or material under  
reasonable use during the lifetime of the vehicle provided the following conditions are  
met: the unit was purchased from an authorized Directed dealer, the unit was profession-  
ally installed and serviced by an authorized Directed dealer; the unit will be professionally  
reinstalled in the vehicle in which it was originally installed by an authorized Directed  
dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the  
bill of sale or other dated proof of purchase bearing the following information: consumers  
name, telephone number and address; the authorized dealers name, telephone number  
and address; complete product description, including accessories; the year, make and  
model of the vehicle; vehicle license number and vehicle identification number. All com-  
ponents other than the unit, including without limitation the siren, the remote transmitters  
and the associated sensors and accessories, carry a one-year warranty from the date of  
purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR  
WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED.  
This warranty is non-transferable and is automatically void if: the units date code or serial  
number is defaced, missing or altered; the unit has been modified or used in a manner  
contrary to its intended purpose; the unit has been damaged by accident, unreasonable  
use, neglect, improper service, installation or other causes not arising out of defects in  
materials or construction. The warranty does not cover damage to the unit caused by  
installation or removal of the unit. Directed, in its sole discretion, will determine what con-  
stitutes excessive damage and may refuse the return of any unit with excessive damage.  
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING  
BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY  
OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF  
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED;  
AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY  
TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION  
WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY  
FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED  
DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT,  
ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A  
GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE  
AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY  
LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,  
DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR  
COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR  
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM  
© 2013 Directed. All rights reserved.  
53  
 
OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE  
SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS  
AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE  
MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY  
LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.  
DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER,  
INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL  
DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF  
EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE  
LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A  
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO  
THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT  
HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED  
DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE  
USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER  
CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.  
Some states do not allow limitations on how long an implied warranty will last or the  
exclusion or limitation of incidental or consequential damages. This warranty gives you  
specific legal rights and you may also have other rights that vary from State to State.  
This warranty is only valid for sale of product(s) within the United States of America and  
in Canada. Product(s) sold outside of the United States of America or Canada are sold  
“AS-IS” and shall have NO WARRANTY, express or implied.  
For further details relating to warranty information of Directed products, please visit the  
support section of Directeds website at: www.directed.com  
This product may be covered by a Guaranteed Protection Plan (“GPP”). See your  
authorized Directed dealer for details of the plan or call Directed Customer Service at  
1-800-876-0800.  
920-10011-01-2011-06  
 

Taylor Kitchen Grill AG 1300 BL User Manual
Tektronix Printer Accessories 016 1144 01 User Manual
Texas Instruments Drums DAC7716EVM User Manual
Texas Instruments Stereo System TMS320C2801 User Manual
Toshiba CRT Television 32DF46 User Manual
Tripp Lite Switch PAM 3 User Manual
Troy Bilt Log Splitter LS 27 TB User Manual
Verilux Vacuum Cleaner VH07 User Manual
Vizio Flat Panel Television VW371 40A User Manual
Wahl Hair Clippers 79650 1201 User Manual