Viper Automobile Alarm 3303 User Manual

The company behind Viper Auto Security Systems

is Directed Electronics.

Vista, CA 92081

www.viper.com

Since its inception, Directed Electronics has had one

purpose, to provide consumers with the finest vehicle

security and car stereo products and accessories

available. The recipient of nearly 100 patents and

Innovations Awards in the field of advanced electronic

technology, Directed Electronics is ISO 9001 registered.

NO ONE DARES COME CLOSE

Quality Directed Electronics products are sold and serviced

throughout North America and around the world.

Call (800) 876-0800 for more information about our

products and services.

G3303V 2009 11

^M33^D03 ^L

Directed Electronics is committed to delivering

world class quality products and services that

excite and delight our customers.

O W N E R’ S G U I D E

Directed Electronics is an

ISO 9001 registered company.

Congratulations

Congratulations on the purchase of your state-of-the-art security system.

Reading this owner’s guide prior to using your system will help maxi-

mize the use of your system and its many features. For more informa-

tion please visit the below website:

http://www.vipe r .com – For general and additional guide infor-

mation.

For any additional questions please contact your authorized Directed

dealer or contact Directed at 1-800-753-0600.

What you get

Welcome to the best generation of vehicle security. Your system con-

tains everything you need.

Responder LC remote control

1-way companion remote control

AC adapter for charging your remote control

This owner’s guide

Quick reference card

Warranty card

Warranty

Card

AUX

Quick

Reference Card

G3303V 2009-11

Important information

Your Warranty

Your system comes with a warranty. Please make sure you receive the

warranty registration card and proof of purchase from your dealer

indicating the product was installed by an authorized Directed dealer.

Your product warranty must be validated within 10 days of purchase.

You can validate it online at www.prodregiste r .com/directed or com-

plete and return the warranty registration card.

Quick Reference Card

Carry this card with you to reference your system’s many features.

Replacement Remote Controls

If additional remote controls are desired, please see your authorized

dealer or visit us at www.directedstore.com to order. Part numbers

are: 7351V for Responder LC 2-way remote control and 7153V for

the 1-way companion remote control.

Contents

Getting Started.................................................................................................... 4

Charging the Remote Control ................................................................ 4

Keys to using this Manual ..................................................................... 5

Responder LC 2-Way........................................................................................... 6

Status Screen Icons.............................................................................................. 8

Using your System............................................................................................. 11

Commands and Confirmations ............................................................ 11

Performing Commands....................................................................... 11

Responder LC Command table ............................................................ 12

Basic Commands (Direct Access) ........................................................................ 13

Arm ................................................................................................. 13

Disarm ............................................................................................. 13

AUX/Trunk........................................................................................ 14

Remote Start /AUX 1/ AUX 4 ............................................................. 14

Advanced Commands: (Level 1) ......................................................................... 15

Silent Arm......................................................................................... 15

AUX 1.............................................................................................. 15

Advanced Commands: (Level 2) ......................................................................... 16

Sensor Bypass................................................................................... 16

Remote Valet .................................................................................... 16

AUX 2.............................................................................................. 16

Advanced Commands: (Level 3) ......................................................................... 17

Sensor Silent Arm* ............................................................................ 17

AUX 3.............................................................................................. 17

Alarm Report*................................................................................... 18

Advanced Commands: (Level 4) ......................................................................... 19

Full Silent Arm*................................................................................. 19

AUX 4.............................................................................................. 19

Responder LC Configuration............................................................................... 20

Navigating Menus and Options .......................................................... 20

Button Operation............................................................................... 20

Access Menu Items ............................................................................ 20

Main Menu....................................................................................................... 21

Setup Remote Menu: .......................................................................... 21

Remote Start Info ............................................................................... 22

Runtime Alert..................................................................................... 22

Car 2............................................................................................... 23

BackLight.......................................................................................... 23

Temp Unit ......................................................................................... 23

Button Beep....................................................................................... 23

System Type...................................................................................... 23

Clock Set.......................................................................................... 24

Review ............................................................................................. 24

Exit .................................................................................................. 24

Sensor Adjust:................................................................................... 24

Pair a Responder LC remote control: .................................................... 24

Demo Mode:..................................................................................... 25

Power Off:........................................................................................ 26

Exit: ................................................................................................. 26

Alarm Features ................................................................................................. 27

Normal Arm Protection....................................................................... 27

Sensor Silent Arm Protection................................................................ 27

Full Silent Arm Protection .................................................................... 28

Sensor Warn-away Messages ............................................................. 28

Full Trigger Messages......................................................................... 28

Emergency Override .......................................................................... 28

Trigger Zone Fault Report.................................................................... 29

Alarm Report when Disarming............................................................. 29

Alarm Report when Requested............................................................. 30

Nuisance Prevention (NPC)................................................................. 30

Remote and System Operations.......................................................................... 31

Passive Arming*................................................................................ 31

Auto Re-arming*................................................................................ 31

Valet Mode....................................................................................... 32

Power Save....................................................................................... 32

Rapid Resume ................................................................................... 32

Automatic Remote Updates ................................................................. 32

Out of Range .................................................................................... 33

No Remote Output............................................................................. 33

Car Select......................................................................................... 33

Vehicle Recovery System (VRS) ............................................................ 34

1-way Companion Remote Control..................................................................... 35

Accessing Commands ........................................................................ 36

Button Auto Lock................................................................................ 36

Car Select......................................................................................... 36

Programming .................................................................................... 37

Battery Information (1-way)................................................................. 38

Low Battery Alerts.............................................................................. 38

Battery Replacement........................................................................... 38

System Expansion Options................................................................................. 39

Battery Information (Responder LC)..................................................................... 41

Low Battery....................................................................................... 41

Battery Life........................................................................................ 42

Battery Disposal ................................................................................ 43

Glossary of Terms.............................................................................................. 44

Government Regulations.................................................................................... 46

Additional information....................................................................................... 47

Interference....................................................................................... 47

Upgrades and Batteries...................................................................... 47

Water/Heat Resistance ...................................................................... 47

Limited lifetime consumer warranty..................................................................... 48

Getting Started

Your remote control is powered by an internal rechargeable battery

that can only be serviced by an authorized Directed dealer. Due to

transit and storage time prior to your purchase, the battery charge

may have depleted. To ensure proper operation, check the battery

level and connect the battery charger if not fully charged. See Bat-

tery Information and Status Screen Icons sections for more information

about the battery.

Charging the Remote Control

1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB

connector into the mini-USB port located on the side of the

remote control (see diagram under Responder LC 2-way). The

CHARGE

text ﬁeld will display

to indicate the remote control is

charging (The remote remains operational while charging and

can command the system).

FULL

2. Once fully charged the text ﬁeld will display

3. The remote control is then ready for use. Disconnect the mini-

USB end from the remote control ﬁrst and then the AC adapter

from the AC outlet.

The remote control remains operational while charging and

can command the system.

Note

If the battery is excessively depleted when the charger is

connected, functionality may be delayed while it charges to

the minimum voltage required to operate the display, after

which normal charging resumes.

Keys to using this Manual

Speciﬁc actions (in bold type) and style conventions are used consis-

tently throughout this manual, they are as follows:

Press: implies pushing in and releasing a button.

Hold: is used after “press” actions when a button needs to be

held in position for an extended period of time, typically several

seconds.

ARMED

this style denotes the text which appears in the text ﬁeld

portion of the display during operations described in the manual.

If the text string is too long for the text ﬁeld, it then plays and loops

sequentially word by word.

Italicized words denote section/sub headings in this guide and

can be located through the table of contents.

An asterisk (*) when used after a word or phrase denotes that

additional details can be found in related sections usually noted

at the bottom of the page or end of the section.

Responder LC 2-Way

Internal

Antenna

Display

Function Button

Mini-USB Port

Command

Buttons

Feature

Description

Internal Antenna

Display

Used for transmitting and receiving information

Status screen - the upper portion of the display contains status

icons for the system, siren, alarm zones, and remote control

Text field - the lower portion of display shows the clock,

command confirmations, page messages and programming

menus

Command Buttons (4)

Function Button

Used to perform arming, disarming and auxiliary channel

commands

Used to access function levels for commands, configuration

menus for programming, and car selection

Mini-USB Port

The battery charger plugs into this port

Control Center

Button

Control Center

LED

The control center, typically located on the upper part of the front

windshield sends and receives commands or messages to and from

your system. It consists of:

The In-vehicle system antenna, for 2 way communication.

The control center LED, as a visual indicator of the system’s sta-

tus.

The control center button, for placing the system into valet mode*

and to perform the emergency override** operation.

See Remote and System Operations section for details.

** See Alarm Features for details.

Status Screen Icons

ALL

Status Screen

Icons

Text Field

The table below describes all the status screen icons.

Icon

Description

Armed: The system is armed, the alarm is enabled

Locked: The system is locked in valet, the alarm is disabled

Disarmed: The system is disarmed, the alarm is disabled

Unlocked: The system is unlocked in valet, the alarm is disabled

Siren is disabled for sensor triggers; remote is paged for all trig-

gers (sensor silent arm)

Siren is disabled for all triggers; remote is paged for all triggers

(full silent arm)

+ ALL

On during warn-away and full trigger message output

On during trunk zone full trigger output and aux/trunk channel

activation

On during fault report to indicate the trunk is open and

bypassed when arming

Icon

Description

On during a sensor zone full trigger output

On during fault report to indicate a sensor is active and

bypassed when arming

On during the door zone full trigger output

On during fault report to indicate a door is open and bypassed

when arming

On during a hood zone full trigger output

On during fault report to indicate the hood is open and

bypassed when arming

On when remote is set to command the system programmed

as car 1*

On when remote is set to command the system programmed

as car 2*

Bars indicate battery level is full, ¾,½,¼ or empty

On while the remote control is transmitting a command

On while the remote control is receiving a message

On with out of range fault tone to indicate the remote failed to

receive a command confirmation

Pager on: The remote will wake up to listen for messages

Pager off: The remote will not wake up to listen for messages

The remote will vibrate when messages are received

The remote will emit beeps and tones when messages are

received

Icon

Description

Text field

Displays the clock, message text and feature menus

On after the garage open** message has been received

On after the garage closed** message has been received

Remote start is active, the engine is running (with optional

remote start module only)

* This icon not present until the car 2 is turned on in the Setup Remote

conﬁguration menu.

** This icon not present until the remote is paired with an optional

garage door opener.

Using your System

Commands and Conﬁrmations

Commands, basic or advanced, are used to activate system fea-

tures and are performed by pressing one of the command buttons.

Basic commands control the most often used security features while

advanced commands control more specialized features and request

reports.

Conﬁrmations for basic or advanced commands are indicated

ﬁrst by siren chirps and parking light ﬂashes, and then by text, icons

and beeps or tones on the remote control. A description of each

feature conﬁrmation is found in the Basic Commands and Advanced

Commands sections.

Performing Commands

Perform basic commands by pressing one of the command buttons

while in the direct access level. Direct access is available while the

text ﬁeld displays the clock. Perform advanced commands by ﬁrst

accessing one of the function Levels and then pressing one of the com-

mand buttons while within a level. Function Levels are available when

the text ﬁeld displays LEVEL 1,2,3 or 4.

Advanced Command example: Silent Arm

1. Press the

button once to access function level 1, the text

LEVEL 1

ﬁeld will display

LEVEL 1

2. Press the

button while

text is still on to perform the

silent arm command.

SILENT ARMED

3. The Responder LC remote will display

text ﬁeld and update the status screen icons.

in the

Responder LC Command table

Direct Access

Level

Button

x 1

x 2

x 3

x 4

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Arm/Lock

(Panic)

Silent Arm

Sensor

Bypass

Sensor Silent Full Silent

Arm

Disarm/Unlock Silent Disarm Remote Valet Car Finder

Remote Start*/

Aux 1/4**

Aux/Trunk

AUX 1

AUX 2

AUX 3

AUX 4

Advance Level

Change Car

(3s), Enter

programming

(8s)

Alarm

Report

Available only with optional remote start module installation

** This button can command either aux 1 or aux 4 if turned on by

an authorized Directed dealer.

Basic Commands (Direct Access)

Arm

Press and release

6:30

The alarm arms, doors lock (if connected), and the siren

chirps and parking lights ﬂash once. The

ARMED

text and beeps play

to conﬁrm and the system status icons update. If valet mode* is on,

VALET

the doors lock and the

arm the alarm normally.

text and tone play. Exit valet mode to

If a trigger zone fault is detected the siren chirps once again and the

trigger zone fault report** plays.

To Arm and Panic

Press and hold

The alarm arms (or locks in valet) and, after 2 seconds, sounds

PANIC

the siren and ﬂashes the parking lights. The

text and

siren tones play to conﬁrm. Press the

button to stop

the output.

Disarm

Press and release

The alarm disarms, doors unlock (if connected), and the siren chirps

DISARM

and parking lights ﬂash twice. The

text and beeps play to

conﬁrm and the system status icons update. If valet mode* is on, the

VALET

doors unlock and the

text and tone play.

More than 2 siren chirps and remote beeps indicate a trigger has oc-

DISARM

curred. The

text is replaced by the alarm report.**

AUX/Trunk

Press and hold

AUX

The trunk opens (if connected) when this button is pressed for 2 sec-

TRUNK

onds. The

text and tones play to conﬁrm.

Remote Start /AUX 1/ AUX 4

Press and release

Remote Start***

Activates (or if on, deactivates) the remote starter. The engine and

REMOTE START ON

parking lights turn on or off accordingly. The

REMOTE START OFF

text and tones play, or the

text and tones play

to conﬁrm. The

icon is displayed in the status screen while the

engine is running.

AUX 1/AUX 4****

Activates (or if on, deactivates) the aux 1 or aux 4 output. The

programmed text and on tones or off tones play to conﬁrm, (See

System Expansion Options).

See Remote and System Operations for details.

See Alarm Features for details.

*** Available only with optional Remote Start module installation.

**** This feature must be turned on by an authorized Directed dealer.

Advanced Commands: (Level 1)

Press and release the

button 1 time.

level 1

Silent Arm

Press and release

The alarm arms, doors lock (if connected), and the parking lights ﬂash

SILENT ARMED

once. The

text plays to conﬁrm and the system status

icons update. Valet mode* or trigger zone fault report** messages

may be received.

Silent Disarm

Press and release

The alarm disarms, doors unlock (if connected), and the parking lights

SILENT DISARM

ﬂash twice. The

text plays to conﬁrm and the system

status icons update. The alarm report** may replace the silent disarm

text.

AUX 1

Press and release

AUX

Activates (or if on, deactivates) the aux 1 output. The programmed

text and on tones or off tones play to conﬁrm, (See System Expansion

Options).

See Remote and System Operations section for details.

** See Alarm Features for details.

Advanced Commands: (Level 2)

Press and release the

button 2 times.

Sensor Bypass

Press and release

level 2

Performing the sensor bypass command will incrementally bypass sen-

sor operations and be conﬁrmed as follows:

Warn-away bypass: The parking lights ﬂash

times,

BYPASS WARN

1 beep and 1 fault tone play to conﬁrm. Sensors

will be activated for full trigger levels of impact only.

Warn-away full trigger bypass: The parking lights ﬂash 3 times,

BYPASS FULL

, 1 beep and 2 fault tones play to conﬁrm. Sensors

will not be activated for any level of impact.

Sensor Bypass off: The parking lights ﬂash 1 time

BYPASS OFF

and 1 beep play to conﬁrm. Sensors are fully operational.

NOT AVAILABLE

If disarmed,

and a fault tone will play.

Remote Valet

Press and release

VALET

Enters (or if on, exits) valet mode. The

text and beeps (1 for

on, 2 for off) play to conﬁrm and the system status icons update. See

Valet Mode for more details

AUX 2

Press and release

AUX

Activates (or if on, deactivates) the aux 2 output. The programmed

text and on tones or off tones play to conﬁrm, (See System Expansion

Options).

Advanced Commands: (Level 3)

Press and release the

button 3 times.

Sensor Silent Arm*

Press and release

level 3

The alarm arms, doors lock, the siren chirps and parking lights ﬂash 3

SENSOR SILENT ARM

times. The

text and beeps play to conﬁrm and the

system and siren status icons update.

Car ﬁnder

Press and release

The siren emits one long chirp and the parking lights ﬂash for 10

CAR FINDER

seconds. The

text and beeps play to conﬁrm. The

parking light ﬂashes stop if armed or disarmed while car ﬁnder is in

progress.

AUX 3

Press and release

AUX

Activates (or if on, deactivates) the aux 3 output. The programmed

text and on tones or off tones play to conﬁrm, (See System Expansion

Options).

Alarm Report*

Press and hold the

button

Requests a report of the most recent triggers and temporarily displays it

in the text ﬁeld. The report clears when the ignition is turned on.

See Alarm Features for more details.

Advanced Commands: (Level 4)

Press and release the

button 4 times.

Full Silent Arm*

Press and release

level 4

The alarm arms, doors lock, and the siren chirps and parking lights

FULL SILENT ARM

ﬂash 4 times. The

text and beeps play to conﬁrm

and the system and siren icons update.

AUX 4

Press and release

AUX

Activates (or if on, deactivates) the aux 4 output. The programmed

text and on tones or off tones play to conﬁrm (See System Expansion

Options).

See Alarm Features for more details.

Responder LC Conﬁguration

Operations of the Responder LC and how it communicates messages

are set in the conﬁguration main menu.

Navigating Menus and Options

Navigating menus and features, changing options, and exiting are

performed using the remote control buttons. The following instructions

discuss how to access and conﬁgure the settings.

Button Operation

To access menus, set options, and to perform actions that are

displayed in the text ﬁeld, use the

To scroll the menu lists in the text ﬁeld use the

To exit conﬁguration: use the or buttons.

button.

AUX

buttons.

Access Menu Items

1. Press and hold the

button for 8 seconds, the remote will beep

is displayed. (If car 2 is on, ignore the car

MAIN MENU

once,

select text and beep after 3 seconds).

2. Release the button to display the main menu item list,

is displayed.

SETUP REMOTE

3. The main menu has been accessed and conﬁguring can begin.

Use the following process to view the main menu features, op-

tions and settings in the text ﬁeld. The following actions are com-

monly used throughout the conﬁguration operation.

AUX

Press the

buttons to change the feature or option

that is displayed in the text ﬁeld.

Press the

button to choose the feature in the text ﬁeld and

view its options. Press it when the desired feature or option

is in the text ﬁeld to set it as the new setting.

Main Menu

The following main menu list of features is available for conﬁguration

of the remote control.

Setup Remote Menu:

Keypad Lock

OFF AUTO

Options:

OFF

When

, the buttons do not lock and always perform a com-

AUTO

mand when pressed. When set to

, the buttons lock after

a 20 second lapse between buttons presses to prevent uninten-

tional operations. If a button is pressed when locked a fault tone

plays as an alert followed by unlock instructions in the text ﬁeld.

To unlock the buttons, press the

button followed by the

READY

button. The unlock tones play and

ﬁeld, a command can now be performed.

is displayed in the text

Auto unlocking

After turning the ignition off, a message to the remote will unlock

the buttons until a command is performed. If auto unlocking is not

desired this feature can be turned off by an authorized Directed

dealer.

Page Mode

Options:

POWER SAVE OFF

Paging is how the Responder LC remote control monitors your

POWER SAVE

system’s messages.

extends battery life by turning

paging off after 72 hours if the remote control is not used during

this period. Just press any button to resume system monitoring.

When set to

it wakes up every few seconds to listen for

OFF

pages from the system. When set to

receive alarm trigger pages.

it does not wake up to

OFF

Note: When

, responses are still received when a command

is performed but alarm trigger pages will not be received.

Page Alert

Options:

TONE VIBE TONE

VIBE

SCREEN ONLY

There are several ways for the Responder LC to alert you when it

has received a message from the system.

TONE VIBE

will alert by both emitting tones and vibrating the re-

TONE

mote. Select

to be alerted by tones that are unique for

VIBE

each message. Select

and the Responder LC will silently

SCREEN ONLY

alert you with a gentle vibration, or select

don’t want to be interrupted.

when you

Remote Start Info

RUNTIME

TEMP CLOCK

Options:

These options are only available when paired to a Directed Elec-

tronics remote start or remote start and security system.

Runtime Alert

OFF

Options:

These options are only available when paired to a Directed Elec-

tronics remote start or remote start and security system.

Car 2

Options:

OFF

ON HOME

This remote can control two systems independently. When set to

OFF

, the car 2 select option is not available. When set to

HOME

the remote can be set to control 2 systems. The

for pairing to a home security system.

option is

BackLight

Options:

OFF

The status screen backlighting can be

illuminate during remote operations.

, or when

will

Temp Unit

Options:

These options are only available when paired to a Directed Elec-

tronics remote start or remote start and security system.

Button Beep

OFF

Options:

When set to

, the remote will emit a beep as conﬁrmation

OFF

of a button press. When set to

button presses.

, beeps are not emitted for

System Type

SEC RKE

Options:

Selects the type of system, namely; security or remote keyless

entry to which the remote has been paired, and adjusts the text

and main menu accordingly. This has been pre-set by the factory

for your system.

Clock Set

Options:

HOUR MIN

The clock is formatted for 12 hour mode with AM or PM in-

dicated. Once the desired time is set return to one of the text

HOUR

MIN

BACK

displays (

) before exiting to save the new

time. Exiting clock set while time is still in the display will revert

to the previous setting.

Review

Displays ﬁrmware version

Exit

Exits and returns to the main menu

Sensor Adjust:

If you feel your security system shock sensor is too sensitive or not

sensitive enough, it is highly recommended that you contact your au-

thorized Directed dealer/professional and have the sensor adjusted

for optimized security detection performance.

Pair a Responder LC remote control:

Pairing is a process where the Responder LC and the system in the

vehicle learn each others encrypted identiﬁcation, securing their com-

munication from intruders. Please note that your remote controls come

pre-programmed from the factory.

Prepare the system

1. Open a door.

2. Turn the ignition on.

3. Press and release then press and hold the control center button.

The control center LED ﬂashes and the siren chirps one time to

conﬁrm the system is prepared.

4. Release the control center button and proceed below.

Note: Begin pairing within 60 seconds or the system will exit (indi-

cated by a long siren chirp) and will need to be prepared again.

Prepare the remote control

Select the desired Car 1 (Default) or Car 2 operation before proceed-

ing.

1. Press and hold the

button of the remote control until a long

MAIN MENU

beep is emitted and

is displayed (If programmed to

operate two systems, conﬁrm the correct car 1 or car 2 text and

beeps at 3 seconds).

REMOTE SETUP

2. Release the

displayed.

3. Press and release the

displayed.

button to view the main menu.

PAIR REMOTE

button two times.

PAIR

4. Press and hold the

release it.

button until

is displayed, and then

5. Press and hold the

SUCCESS

button until the siren emits a long chirp.

is displayed with a sequence of chimes.

FAILED

Note: If

is displayed, make sure the system is still pre-

pared and repeat step 5 until successful.

Demo Mode:

Demo mode plays a pre-selected group of animations as a demonstra-

tion tool to show friends or family. Running demo mode shortens the

battery life over time if used excessively

SINGLE SILENT

: The remote will display a selection of icons on

the status screen without beeps and tones then stop

: The remote will display a selection of icons on

the status screen with beeps and tones then stop

SINGLE SOUND

LOOP SILENT

: The remote will display a selection of icons on

the status screen without beeps and tones in an endless loop until

the battery charger is disconnected.

LOOP SOUND

: The remote will display a selection of icons on

the status screen with beeps and tones in an endless loop until the

battery charger is disconnected.

Note: Loop silent and loop sound are not available and will not appear

in the demo mode menu unless the battery charger is connected.

Power Off:

When an extended period of non-operation is anticipated, turning the

power off will preserve the battery charge. Press the

button while

POWER OFF

is displayed. The status screen icons clear as the power

off tones play, the remote is turned off.

To turn the remote on, Press and hold the

button for 3 seconds,

the status screen icons refresh as the power on tones play. The remote

also turns itself on and begins charging when the battery charger is

connected.

Exit:

EXIT

To return to normal operation, press the

played.

button while

is dis-

Alarm Features

Normal Arm Protection

Control center LED: The control center LED ﬂashes as a visual indicator

that your vehicle’s security system is active.

Starter Kill: The failsafe starter kill relay prevents the engine from start-

ing

May require additional parts and installation

Note

Sensor triggers: The onboard shock sensor can distinguish minor im-

pacts from major impacts to the vehicle exterior. Minor impacts causes

the system to emit a warn-away output by chirping the siren and ﬂash-

ing the parking lights for 3 seconds. Major impacts caused for exam-

ple by a forcible entry attempt, results in a full trigger output. The siren

sounds and the parking lights ﬂash for 30 seconds or longer. Both

warn-away and full triggers send a message to the remote control.

Point of entry triggers: Opening the hood or trunk causes a full trig-

ger output, while opening a door or turning on the Ignition causes the

siren to chirp 3 seconds before beginning the full trigger output. This

3 second delay allows time to disarm and silence the siren in case of

accidental trigger. The full trigger message is still sent to the remote.

Sensor Silent Arm Protection

Sensor warn-away and sensor full trigger activations only send mes-

sages to the remote, while the parking light ﬂash and siren outputs are

defeated. Point of entry triggers will activate the parking light ﬂash,

siren, and send messages normally.

Full Silent Arm Protection

Sensor warn-away, sensor full trigger and point of entry activations

will only send messages to the remote, with parking light ﬂash and

siren outputs defeated.

Sensor Warn-away Messages

When the remote receives a sensor warn-away message it emits 10

SENSOR WARN

beeps (if on) and displays a sensor zone speciﬁc

text

for 30 seconds. Warn-away messages cannot be reviewed or dis-

played in reports.

Full Trigger Messages

A full trigger message generates a full trigger output of siren tones and

TRIGGER

zone speciﬁc

text followed by an alert that consists of 1

long beep per minute for 10 minutes.

To stop the output and alert, press a command button to perform a

command, or Press the

button.

Emergency Override

The following procedure disarms the system when a programmed re-

mote is not available. Number of presses__________

1. Turn the ignition on.

2. Press the control center button the correct number of times

(the default is 1 press).

3. After a few seconds the siren output ceases and the system

is disarmed.

As a precaution, if programmed for passive arming or auto

re-arming the system should be placed into valet mode until

a remote is available .

Note

Trigger Zone Fault Report

When armed by remote command the system runs a status check

of the alarm trigger zones. Faulty zones (usually caused by dome

light delay or open trunk) are bypassed and reported via the control

center LED and remote, while all other trigger zones remain active

and are monitored to protect the vehicle. Should a faulty zone self

correct (dome light turns off) it becomes active and is then monitored

normally.

The siren chirps once again a few seconds following the arming

chirps as an audible alert, the control center LED ﬂashes in groups to

indicate the zone number. The remote will emit a single fault tone and

play zone speciﬁc text that identiﬁes the faulty zones.

Alarm Report when Disarming

The most recent alarm triggers (if any) are reported when the alarm is

disarmed via the remote control, siren chirps, parking light and control

center LED ﬂashes. The siren chirps 4 times (or 5 times if NPC on*),

the parking lights ﬂash 3 times, and the control center LED ﬂashes in

groups to indicate the last two zones that were triggered (see Table

DISARM

ALARM REPORT

of Zones). The

text is replaced by

and text

identifying the triggers. The report output will repeat for each disarm

operation until the vehicle is driven.

* See Nuisance Prevention (NPC) for more details.

Table of Zones

Zone Name

Zone # (led flashes)

Trunk

Shock Sensor

Door

Sensor 2

Ignition

Hood

Sensor 3

Alarm Report when Requested

The alarm report displays the two most recent alarm triggers depend-

ing on the system state when requested. When disarmed, the report

will display text to identify the two most recent triggers since the ve-

hicle was last driven. When armed, the report will display text to

identify the two most recent triggers since the system was armed.

The Alarm Report clears when ignition is turned on.

Note

Nuisance Prevention (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,

bypasses them until corrected. If a point of entry (trunk, hood, door)

is left open following a forced entry, it is bypassed. It becomes active

again only after being closed.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset

bypassed sensors.

Remote and System Operations

Passive Arming*

Park and exit the vehicle, after the doors are closed the passive arm-

ing countdown begins. The control center LED ﬂashes quickly and

upon reaching 20 seconds the siren then chirps once. At 30 seconds

the system arms itself.

Anytime before the system arms you can re-enter the vehicle or

open the trunk to load or unload items and, after closing passive arm-

ing resumes.

To stay secure in the case of accidentally disarming the system, if

a door is not opened within 30 seconds the system re-arms itself and

locks the doors.

Auto Re-arming*

Auto re-arm ensures the vehicle stays protected if it is not entered after

disarming by remote control. After disarming by remote, the alarm

automatically re-arms itself (and locks the doors if programmed on) in

30 seconds. Open any point of entry to stop the re-arm until the next

disarm by remote.

Onetime Bypass*

Turn the ignition on for one to three seconds and then off. The siren

chirps once to conﬁrm one-time bypass is enabled.

One-time bypass can be used to temporarily bypass the passive arm-

ing operation for one cycle. It also bypasses the comfort closure and

auxiliary channel outputs programmed to activate when arming. After

the next disarm all operations return to normal.

* These features must be turned on by an authorized Directed dealer.

Valet Mode

Valet mode can be entered and exited by performing the remote valet

command or manually using the vehicle key and the control center

button. When entered, the alarm functions are defeated while the

convenience features still operate normally.

Arm and disarm commands lock and unlock the doors while the

VALET

text and beeps play to conﬁrm.

Use the following steps to manually enter and exit valet mode:

1. Turn the ignition switch on and then off

2. Immediately press and release the control center button once

3. The control center LED turns on when entering and off when exit-

ing.

Power Save

To reduce power consumption the control center LED modiﬁes its out-

put if the vehicle is parked for an extended period. If armed the ﬂash-

ing is reduced after 24 hours. When valet mode is on the control

center LED will turn off after 1 hour and will reset each time the ignition

is turned off.

Rapid Resume

If power is ever disconnected by a mechanic or thief, the system will

resume the state it was in at the time of disconnection, when power

is reconnected.

Automatic Remote Updates

The system sends a silent message to all remote controls after any

major action has occurred. When the remote receives this message it

updates the status screen icons. This way all users are able to quickly

review the system status just by accessing the status screen.

Out of Range

Each time a command is performed the remote will expect a com-

mand conﬁrmation from the system. If a command conﬁrmation is not

received the out-of-range icon ( ) and a fault tone will play as an

alert.

No Remote Output

Occasionally when a command is performed the remote may not

generate a command conﬁrmation output or out of range output. This

indicates that the system received the command but it was an incom-

plete command (e.g. aux button pressed too short to activate the trunk

release) or it was an illegal message (e.g. the command was cor-

rupted due to local RF interference). These are temporary normal func-

tions of the system and remote, perform the command again within 10

seconds to return to normal operation.

Car Select

Car 2 must ﬁrst be turned on (See Responder LC Conﬁguration and

Main Menu sections to turn on).

Two Way Remote

1. Press and hold the

button for 3 seconds or until the remote

CAR 1

beeps. The

icon ﬂashes and the text

CAR 2

is displayed.

2. Change car: While in this mode press the

button to switch

between cars and the

icon changes accordingly

indicating which car the remote currently operates.

3. Select the car you want to operate and then press any com-

mand to operate the system. The selected car remains selected

until the setting is changed.

Vehicle Recovery System (VRS)

In case your vehicle is stolen or carjacked, VRS sounds the siren and

ﬂashes the parking lights to persuade the thief to abandon the vehicle,

and when the ignition is turned off, activates the starter kill to prevent

the engine from restarting.

To arm VRS, perform the silent arm command while driving, or while

the ignition is turned on. The siren chirps and parking lights ﬂash once

ARMED

to conﬁrm arming. The

text and beeps play, and the system

status icons update to conﬁrm arming.

NOT AVAILABLE

If valet mode is on, the

text and tone plays, exit valet

mode before arming VRS.

Once armed, VRS triggers if any door is opened then closed while

the ignition remains on, and if the vehicle is parked while armed, VRS

triggers when driving resumes. See trigger description below.

When triggered, the control center LED begins ﬂashing after ﬁfteen

seconds. Within 45 seconds perform the silent disarm command to

disarm VRS. If not disarmed, the siren begins chirping for 60 seconds

and then becomes a constant siren blast with ﬂashing parking lights

for several minutes. This output will continue and be repeated each

time the ignition is turned on until VRS is disarmed.

To disarm, perform the silent disarm command anytime before VRS

has been triggered, or within one minute after it has triggered and be-

fore the siren begins to chirp. If not disarmed before the siren begins

to chirp, the emergency override procedure must be used to disarm

VRS.

1-way Companion Remote Control

Transmit

LED

Command

Buttons

AUX

Function

Button

Direct Access

Level

Button

x 1

x 2

x 3

x 4

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Arm/Lock

(Panic)

Silent Arm

Sensor

Bypass

Silent Disarm Remote Valet Car Finder

Sensor Silent Full Silent

Arm

Disarm/

Unlock

Remote

Start*/Aux

1/4**

Aux/Trunk

AUX 1

AUX 2

AUX 3

AUX 4

AUX

Not Used

Used to access function levels for advanced commands

with multiplier in top row implies button presses)

(

Available only with optional remote start module installation

** This feature must be turned on by an authorized Directed dealer.

Using the 1-way Companion remote

The 1-way companion remote commands the system features as

shown in the previous table, but only transmits and does not provide

feedback as with the 2-way remote control. Siren chirps and parking

light ﬂashes are used to indicate that a command has been received

and activated as described in the Basic Commands and Advanced

Commands sections.

Accessing Commands

Similar to the Responder LC remote, basic commands are performed

when a command button is pressed directly. To perform advanced

commands press the

levels. For example;

button one to four times to access function

x4 in the table implies pressing four times

to reach level 4. The transmit LED ﬂashes in groups of 1 to 4 for a few

seconds to indicate the respective level. Press the desired command

button while the transmit LED is ﬂashing to perform the command.

Button Auto Lock

When on, the remote control buttons lock if more than 20 seconds

lapses between button presses. If a button is pressed when locked,

the remote control appears to be non-operational and will not transmit

a command or illuminate the transmit LED. To unlock the buttons; press

the button followed by the

button.

Car Select

Car 2 must ﬁrst be turned on (See Remote Features menu under Pro-

gramming section below to turn on). Press and hold the

button

for 3 seconds. The remote ﬂashes the transmit LED once or twice to

indicate the selected car is 1 or 2.

Release the

button, then press and release while the transmit

LED ﬂashes to perform car select. Once the car is selected a command

can be performed by pressing one of the command buttons.

Programming

To enter; hold the

button for 8 seconds until the transmit LED turns on,

the programming main menu has been accessed (If programmed to

operate two systems, ignore the transmit LED ﬂashes at 3 seconds).

To exit; press and release the

button to go back and repeat to exit.

The transmit LED turns off when programming is exited.

Sensor Adjust

The

button is used for sensor adjustment, to avoid unintended

alarm triggers, it is recommended that an authorized Directed

dealer perform all sensor adjustments.

Remote Features Menu

Press and release the

button, 2 transmit LED ﬂashes indicate

the remote features menu is accessed and can be set. Press the

buttons indicated below, 1 ﬂash turns the feature on, 2 ﬂashes

turns the feature off.

Autolock feature: Press

Car 2 feature: Press

to turn on/off.

Remote Learning

Press the button,3 transmit LED ﬂashes indicates the remote is

ready to program to the system.

Per the instruction in Pair the Responder LC remote control under

the Main Menu section of this guide, following step 3 of Prepare

the system. Press and hold the

button, the siren emits one

long chirp to conﬁrm the remote has been learned.

Battery Information (1-way)

The 1way companion remote is powered by one 3V coin cell lithium

battery (PN CR-2032) that will last approximately one year under

normal use.

Low Battery Alerts

When disarming the system using a remote with a low battery the

siren will emit one additional chirp as an alert. If conﬁrmation chirps

are programmed off, the system will still emit one chirp as an alert

when disarming.

Battery Replacement

Using a small

ﬂathead screwdriver,

insert into slot located

at the bottom of the

keypad and carefully

pry the front of the unit

open.

Turnboththeunit

front and circuit board

over, remove battery

from clip and replace

while observing the

correct polarity .

3. With the front and circuit board still turned over, turn back portion

of unit onto both parts, reposition all parts and snap together.

System Expansion Options

Controlling Two Vehicles (car select)

The Responder LC and 1way companion remote can control systems

in two different vehicles saving the need for multiple remote controls.

This feature also allows for customized system conﬁgurations on each

vehicle that has more than one driver. See following Owner Recogni-

tion for details.

Owner Recognition

The system can be conﬁgured to recognize the remote used when

disarming and change selected features to match the remote users

preferences. Memory seat adjustment, siren chirps, passive arming,

remote button auto unlocking, alarm output duration can all be custom

set for each remote user at the time of installation.

Comfort Closure

Comfort closure emulates turning the key in the door cylinder or hold-

ing the lock button of an OEM keyless entry. It will automatically close

the windows and sunroof on vehicles with this type of OEM conve-

nience feature.

Alarm Output Duration

The length of time the siren sounds can be adjusted from 1 to 180

seconds at the time of installation.

Arming and Warn-away Chirp Control

The system arm, disarm and sensor warn-away chirps can be conﬁg-

ured for those that prefer a custom silent alarm operation.

Driver Door Priority Unlocking

The door unlocking operation can be conﬁgured to emulate an OEM

style of driver priority unlocking for added security during disarming.

Auxiliary Channels

The auxiliary channel outputs of this system can activate many of the

convenience features found in today’s vehicles. Once a command is

performed to activate a convenience feature the Responder LC dis-

plays text that matches the feature. The system installer can clarify if

any of the below listed features are compatible with your vehicle.

Trunk release

Widows open/close

Left sliding door open/close

Right sliding door open/close

Rear hatch open/close

Sunroof open/close

Audio system

Headlights

Battery Information (Responder LC)

The Responder LC remote control is powered by an internal recharge-

able battery that can be serviced only through an authorized Directed

Electronics dealer. The information and precautions in this section can

help maximize your battery’s life and usage in providing your Re-

sponder LC remote control with many years of trouble free operation.

The battery information for the 1way companion remote control can

be found in the 1-way Companion Remote Control section of this

manual.

Warnings! NEVER connect the supplied AC adapter

to products other than the Responder LC remote con-

trol. It is a high current device designed speciﬁcally for

rapid charging of the Responder LC battery and may

cause severe damage or explosion when connected to

any other products.

Charging the battery when the temperature is below

32°F (0°C) or above 113°F (45°C) may cause severe

battery damage and/or reduce battery life. Avoid

placing the remote control in areas exposed to ex-

treme cold or heat (direct sunlight) when charging the

battery.

Low Battery

After a command is performed the Responder LC and 1way com-

panion remote controls check their battery level and, when the level

requires attention, will begin generating alerts. Once the alerts begin

they will continue to command the system for several days but should

be charged at the earliest opportunity or failure to control the system

may occur.

Low Battery Alerts

When disarming the system using a remote with a low battery the

siren will emit one additional chirp as an alert. If conﬁrmation chirps

are programmed off, the system will still emit one chirp as an alert

LOWBAT

when disarming. After performing a command,

and several

beeps play on the Responder LC remote to indicate the battery needs

to be charged.

To preserve power at critically low battery levels the

Responder LC turns the pager off and stops receiving

messages from the system. It will continue to command

the system until the battery can be charged.

Important

Battery Life

The Responder LC remote control has many features that make it one

of the most unique remote controls on the market today. The default

feature settings provide for excellent battery charge duration. How-

ever, to maximize this duration between charges, the following sug-

gestions will help:

Turn the remote off: When not in use and/or out of range of the

vehicle the remote can be turned off in the main menu.

Turn Paging off: The remote will not wake up to check for mes-

sages with paging off in the setup remote menu.

Note: The remote will not receive trigger messages from the sys-

tem.

Turn Beeps off: The button beeps can be turned off in the setup

remote menu. The command beeps still play normally.

Battery Disposal

Directed Electronics cares about the environment. If you

need to dispose of the battery, please do so in accordance

with your municipal requirements for battery disposal.

Glossary of Terms

Document Terminology

Control Module

The “brain” of your system. Usually hidden underneath the

dash area of the vehicle. It houses the microprocessor which

monitors your vehicle and controls all of the system’s func-

tions.

Responder LC (2-way A hand-held, remote control which operates the various func-

Remote Control)

tions of your system and receives messages and pages from

the system.

Companion Remote A hand-held, remote control which operates the various func-

(1-way Remote Con- tions of your system but does not provide message display..

trol)

Control Center

The control center contains the system’s radio-frequency anten-

na, the control center button and LED. For maximum remote-

control range, the control center is usually located at the top of

the windshield, centered near the rear-view mirror.

Control Center LED

A light used to indicate the status of your system. It is located

on your system’s control center.

Control Center Button A small push button located on your system’s control center.

It is used to override (disarm) the alarm when a remote is not

available or to enter or exit valet mode.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television, which can be

determined by turning the equipment OFF and ON, the user is encouraged to

try to correct the interference by one or more of the following measures:

s 2EORIENT OR RELOCATE THE RECEIVING ANTENNAꢀ

s )NCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVERꢀ

s #ONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH

the receiver is connected.

s #ONSULT THE DEALER OR AN EXPERIENCED RADIO ꢁ 46 TECHNICIAN FOR HELPꢀ

This device complies with the Industry Canada Radio Standards Speciﬁcation

RSS 210. Its use is authorized only on a no-interference, no-protection basis;

in other words, this device must not be used if it is determined that it causes

harmful interference to services authorized by IC. In addition, the user of this

device must accept any radio interference that may be received, even if this

interference could affect the operation of the device.

WARNING! Changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to operate this de-

vice.

Additional information

Interference

All radio devices are subject to interference which could affect proper

performance.

Upgrades and Batteries

Any upgrades to this product and/or installation of batteries must be

performed by an authorized dealer. Do not attempt to perform any

unauthorized modiﬁcations to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please

take care to keep this product dry and away from heat sources. Any

damage from water or heat will void the warranty.

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace

(at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf-

ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated

sensors and accessories, which proves to be defective in workmanship or material under

reasonable use during the lifetime of the vehicle provided the following conditions are

met: the unit was purchased from an authorized Directed dealer, the unit was profession-

ally installed and serviced by an authorized Directed dealer; the unit will be professionally

reinstalled in the vehicle in which it was originally installed by an authorized Directed

dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the

bill of sale or other dated proof of purchase bearing the following information: consumer’s

name, telephone number and address; the authorized dealers name, telephone number

and address; complete product description, including accessories; the year, make and

model of the vehicle; vehicle license number and vehicle identification number. All com-

ponents other than the unit, including without limitation the siren, the remote transmitters

and the associated sensors and accessories, carry a one-year warranty from the date of

purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR

WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable

and is automatically void if: the original purchaser has not completed the warranty card

and mailed it within ten (10) days from the date of purchase to the address listed on the

card; the unit’s date code or serial number is defaced, missing or altered; the unit has

been modified or used in a manner contrary to its intended purpose; the unit has been

damaged by accident, unreasonable use, neglect, improper service, installation or other

causes not arising out of defects in materials or construction. The warranty does not cover

damage to the unit caused by installation or removal of the unit. Directed, in its sole

discretion, will determine what constitutes excessive damage and may refuse the return

of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING

BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY

OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF

NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED;

AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY

TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION

WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY

FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED

DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT,

ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A

GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE

AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY

LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,

DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR

COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR

ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM

OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE

SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS

AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE

MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY

LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.

DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER,

INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL

DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF

EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE

LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A

LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO

THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT

HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED

DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE

USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER

CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the

exclusion or limitation of incidental or consequential damages. This warranty gives you

specific legal rights and you may also have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America.

Product(s) sold outside of the United States of America are sold “AS-IS” and shall have

NO WARRANTY, express or implied. This product may be covered by a Guaranteed

Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call

Directed Customer Service at 1-800-876-0800.

Make sure you have all of the following information from your authorized Directed

dealer:

A clear copy of the sales receipt, showing the following:

Date of purchase

Your full name and address

Authorized dealer’s company name and address

Type of alarm installed

Year, make, model and color of the automobile

Automobile license number

Vehicle identification number

All security options installed on automobile

Installation receipts

920-0003 06-06

The company behind this system is Directed Electronics

Since its inception, Directed Electronics has had one purpose, to provide

consumers with the ﬁnest vehicle security and car stereo products and

accessories available. The recipient of nearly 100 patents and Innovations

Awards in the ﬁeld of advanced electronic technology.

Directed is ISO 9001 registered.

Quality Directed Electronics products are sold and serviced throughout

North America and around the world.

Call (800) 274-0200 for more information about our products and services.

G3303V 2009-11

Vista, CA 92081

www.directed.com

Teac Stereo Amplifier A H300mkII User Manual
Teknika Clock Radio DAB 109F User Manual
Thermador Oven PODC301 User Manual
Thiel Audio Products Speaker System CS24 User Manual
THORENS Turntable TD 2010 User Manual
Tiffen Camera Accessories Digital Pro SLR Kit User Manual
Toastmaster Convection Oven 7093 User Manual
Tribest Juicer SS9002 User Manual
Volvo MP3 Player Accessories 121 User Manual
Vulcan Hart Electric Steamer MHB24E User Manual